Audio Settings - Kenwood KDC-BT610U Instruction Manual

BLUETOOTH®
STATUS Shows the status of the selected device.
IOS CONNECTED: You are able to use the application using the iPhone/iPod connected
via Bluetooth or USB input terminal.
IOS NOT CONNECTED: No IOS device is connected to use the application.
ANDROID CONNECTED: You are able to use the application using the Android
smartphone connected via Bluetooth.
ANDROID NOT CONNECTED: No Android device is connected to use the application.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. ( 8)
• If you plug in an iPhone/iPod to the USB input terminal while listening to
iPod BT source, the source automatically change to iPod USB. Press
select iPod BT if the device is still connected via Bluetooth.
Internet radio via Bluetooth
Listen to Pandora
You can listen to Pandora on the iPhone/iPod/Android device via Bluetooth on
this unit.
• Make sure the USB input terminal is not connected to any device.
Preparation:
Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5)
1
Open the Pandora application on your device.
2
Connect your device via Bluetooth connection. ( 12)
3 Press repeatedly to select PANDORA (for iPhone/iPod) or
PANDORA BT (for Android device).
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora via USB input terminal.
( 10)
18
ENGLISH

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold
(or using the remote control)
1
Press AUD to enter [AUDIO CONTROL].
2 Press J / K to select an item, then press
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer
output level.
to
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are
preset into each selection (BAND1 LEVEL to BAND13 LEVEL).
BAND1 LEVEL
LEVEL LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to
memorize for each source. (Before making an adjustment, select
the source you want to adjust.)
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
BAND2 LEVEL to LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to
BAND13 LEVEL memorize for each source. (Before making an adjustment, select
the source you want to adjust.)
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/
USER: Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [MANUAL EQ].)
to exit.
.
.
Default: XX