Toshiba e-STUDIO163 Service Handbook page 63

Classifi-
Code
cation
484 Laser Polygonal motor rotational
status switching at the Auto
Clear Mode
485 Laser Rotational status of polygo-
nal motor on standby
486 Laser Timing of auto-clearing of
polygonal motor pre-run-
ning rotation
489 Laser Polygonal motor rotation
number on standby
490 Laser Polygonal motor rotation in
the energy saving mode
502 Image Error diffusion and dither
setting at photo mode
508 Image Custom Mode setting
December 2005 © TOSHIBA TEC
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
ALL
ALL
Others: 0
ALL
ALL
ALL
PPC
PPC
e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 45
RAM Contents
able
0 M Sets whether or not
<0-1> switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
JPN: 1 M Sets the rotational sta-
tus of polygonal motor
<0-1> on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)
1: Stopped
0 M Switches the polygonal
<0-2> motor to the standby
rotation when a certain
period of time has
passed from the pre-
running. At this code,
the period to switch the
status to the standby
rotation is set.
0: 15 sec.1: 30 sec.
2: 45 sec.
* This setting is effec-
tive when "0" or "2"
is set at 08-483.
5 M 0: 38,090.55 rpm
<0-5> 1: 35,000 rpm
2: 30,000 rpm
3: 25,000 rpm
4: 20,000 rpm
5: 10,000 rpm
0 M 0: Stopped
<0-1> 1: 10,000 rpm
1 M Sets the image repro-
<0-1> duction method at
photo mode.
0: Error diffusion
1: Dither
0 M 0: Not used
<0-4> 1: Custom Mode 1
when Text/Photo is
set as a base
2: Custom Mode 2
when Text is set as
a base
3: Custom Mode 3
when Photo is set
as a base
(Error diffusion)
4: Custom Mode 4
when Photo is set
as a base (Dither)
Proce-
dure
1
1: Invalid
1
1
1
1
1
1
2