Table of Contents
Advertisement
Using This Unit in Combination with a PJP
Auto-tracking shooting
from the front
Follow the procedure below to shoot an image
in front of the camera and switch the display
image automatically based on the talker's position
detected by the PJP's microphones.
1
In the "PJP-CAM1 Controller" screen,
select the "Auto" tab.
2
Turn the camera to the front.
Automatically switches to "Front Mode".
3
Check the "Enable Tracking" box.
Tip
To adjust the shooting position without the auto-tracking
function, use the Orientation Selection radio button.
16
Auto-tracking shooting
in all directions
Follow the procedure below to shoot an image of
the entire circumference and switch the display
image automatically based on the talker's position
detected by the PJP's microphones.
1
In the "PJP-CAM1 Controller" screen,
select the "Auto" tab.
2
Turn the camera upward.
Automatically switches to "Upside Mode".
3
Check the "Enable Tracking" box.
Tip
To adjust the shooting position without the auto-tracking
function, use the Orientation Selection radio button.
(continued)
Advertisement
Table of Contents
