What’s in the box Handset Line cord User Guide The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
Page 3
Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to proper connector at the back of the base station. 3.
Page 4
Enjoy Make a call Enter the phone number and press Press and enter the phone number. Answer a call When the phone rings, press End a call Press key. Adjust earpiece volume during a call <VOLUME 1> Press to select from Set the ring melody 1.
Page 5
Switch the handset On/Off Press and hold key for 5 seconds to switch off the handset in stand-by mode. Short press key to switch on the handset again. Keypad lock/unlock Press and hold key for 2 seconds to lock and unlock keypad in stand-by mode. Paging 1.
Troubleshooting For more information, please refer to p.51 of CD530 user manual and p.59 of CD535 user manual. Problem No dialling tone • Poor audio quality • icon does not • appear Caller Line Identification • (CLI) service does not work...