Basic Operation; Checking Part Names And Functions; Remote Control; On First-Time Startup - Pioneer MVH-AV290BT Owner's Manual

Basic operation
Checking part names and
functions
1
LCD screen
2
RESET
~
Resetting the microprocessor on page 6
button
3 Volume(+/-) button
4 MUTE Press to switch the mute setting to on m off.
button
5
:: button
Pr·ess to switch the drsplay between the top
menu screen and the current sour-ce screen.
6 DISP Press to turn the display on m off.
button
7 Track ( Performs manual seek tuning, fast forwards,
~ rever·se and tmck search controls.
) button Press to answer or end a call.
Remote control
The r·emote control CO-R33 is sold separately.
For details concerning operations. see the remote control
manual.
Plugging and unplugging a USB stor-
age device
0 This pr·oduct may not achieve optimum perfmmance with
some USB storage devrces.
0
Connection via a USB hub is not possible.
0 A USB cable rs required for connection.
Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
CD
USB cable
\1) USB storage device
[ill Check that no data is being accessed before pulling out the
USB storage device.
On first-time startup
1 Start the engine to boot up the system.
After a short pause. the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
0 From the second time on. the screen shown will differ-
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touchl~l.
The top menu screen appears.
7