D-Link DIR-850L User Manual
Wireless ac1200 dual band
gigabit router
Hide thumbs
Also See for DIR-850L:
- User manual (176 pages) ,
- Quick installation manual (65 pages) ,
- Setup & user manual (13 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DIR-850L
Summary of Contents for D-Link DIR-850L
- Page 1 User Manual DIR-850L Wireless AC1200 Dual Band Gigabit Router www.dlinkmea.com...
-
Page 2: System Requirements
USER MANUAL: DIR-850L Wireless AC1200 Dual Band Gigabit Router SYSTEM REQUIREMENTS • An Ethernet-based Cable Network Requirements • IEEE 802.11ac, 802.11a, 802.11n or 802.11g wireless clients • 10/100/1000 Ethernet Web-based Configuration Computer with the following: Utility Requirements • Windows®, Macintosh, or Linux-based operating system •... -
Page 3: Hardware Overview Leds
USB Port Connect a USB flash drive to share content throughout your network. WPS Button Press to start the WPS process. The Internet LED will start to blink. LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles Internet Port Using an Ethernet cable, connect your ONT to this port. -
Page 4: First Time Login
Click to log in. Enter D-LINK QUICK SETUP WIZARD Select Basic settings to run the Setup Wizard Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your such as and password. - Page 5 Click to continue Next For both the 2.4GHz 5GHz segments, create a Wi-Fi network name (SSID) using up to 32 characters. Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this pass phrase or key entered to be able to con- nect to your wireless network The router will once the settings are saved.
-
Page 6: Web-Based Configuration Utility
WEB-BASED CONFIGURATION UTILITY To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.1.1) in the address bar. Enter your User name and Password INTERNET CONNECTION SETUP Configure the interface PPPOE TCP/IP Settings >>... - Page 7 CHECK THE STATUS OF MANAGEMENT INTERFACE Management >> Status > >WAN configuration To Check the status of Management interface: Go to If connected, the management interface acquires a private IP address automatically from DHCP server. CHECK THE STATUS OF PPPOE/INTERNET INTERFACE To check the status of management interface go to: Management>>Status>>WAN configuration Interface will receive a public routable IP address.
-
Page 8: Lan Connection Setup
LAN CONNECTION SETUP You can configure the LAN IP address according to the actual application. The preset IP address is You can use the default settings 192.168.1.1. and DHCP service to manage the IP settings for the private network. The IP address of the device is the base address used for DHCP. TCP/IP Settings >>... -
Page 9: Wireless Security
Select this to turn Wi-Fi on and off. Disable Wireless: The Wireless Network Name is a unique name that identifies a network. All devices on a network must share Wireless Network Name (SSID): the same wireless network name in order to communicate on the network. If you decide to change the wireless network name from the default setting, enter your new wireless network name in this field. - Page 10 TO CONFIGURE 2.4 GHZ WIRELESS 802.11 B/G/N SSID This function is used to modify the standard 802.11 b/g/n wireless 2.4 GHz radio settings. It is recommended not to change the default settings, because incorrect settings may impair the performance of your wireless radio. The default settings provide the best wireless radio performance in most environments.
-
Page 11: Firewall Settings
WIRELESS SECURITY In the page, click Settings. The page shown in the following figure appears. Select the SSID that you want to Wireless Settings Security configure from the drop-down list. Select the encryption type from the Security Mode drop-down list. You can select None, WEP, WPA , WPA2 and WPA-Mixed. -
Page 12: Mac Filtering
2. IP FILTERING To select the IP Filter option to configure the IP filters function for the router. Firewall >> IP Filtering: To do IP Filtering go to: Select the IP Address. Local IPv4 Address: Click once the settings are done. Apply Changes 3. -
Page 13: Port Forwarding
Select the MAC address of the device that you want to allow or deny. MAC Address: Click once the settings are done. Apply Changes 4. PORT FORWARDING Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. -
Page 14: Url Filtering
Enter the IP address of the computer on your local network that you want to allow the incoming service to. IP Address: Use the drop-down menu to select the Application. Application Name: Set the TCP and UDP ports that you want to OPEN. Port Range: Click once the settings are done. - Page 15 6. DMZ On this page the user can configure services related to the DMZ feature of this product. Firewall >> DMZ To do DMZ Settings go to: Enter the internal IP address for the DMZ function. DMZ Host IP Address: Click once the settings are done.
-
Page 16: Firmware Update
Click the “Browse” button to locate the D-Link update file on your computer. Once you have found the file to be used, click the “upload” button below to start the firmware update process. This can take a minute or more. -
Page 17: Admin Password
When you select to restore the Default Settings you will lose any settings defined before. Reset Setting to Default: If the admin’s password is lost and you can no longer manage the device, Use the restore switch at the back of the device to set the settings to Factory settings. -
Page 18: Questions And Answers
Q: How do I log into my router? A: Note: This FAQ uses the DIR-850L as an example. Also, the web UI is not a website on the Internet, it is built in to the router. Make sure your computer or device is connected to the router. - Page 19 If you forgot your password, you will need to reset the router back to the factory default settings. Unfortunately this will remove any settings you have and you will need to reconfigure your router. To reset your router, use a paper clip and press & hold the reset button (usually located on the back of the router) for 10 seconds and release. Allow 1 minute to reboot.
- Page 20 If you have a Wi-Fi password (security key) configured on your extender, enter the password and click OK. Step 3: Select the Network Type. Step 4: Your computer is now connected. The computer should now automatically connect to this network when it is within range. Step 5: www.dlinkmea.com...