Table of Contents
Advertisement
Figure 3-6
The "System Properties" Folder
6. Click the
CD-ROM drive is listed.
If the CD-ROM icon is listed in both Step 3 and
this step, you can stop here.
successfully recognized your new CD-ROM drive.
Otherwise, proceed with Steps 7 and 8.
7. Install the supplied device driver under DOS by
following the instructions given in Section
3.2.1.
8. Restart Windows 95 and repeat Step 3.
This time the CD-ROM icon should appear in
's peripheral icon display (but not in
the Device Manager's listing for reasons beyond
this manual's purposes).
3
INSTALLING YOUR DRIVE
tab and check whether the
Windows 95 has
15
Advertisement
Table of Contents
