Cisco TelePresence SX80
Introduction
SIP settings
SIP ANAT
ANAT (Alternative Network Address Types) enables media negotiation for multiple
addresses and address types, as specified in RFC 4091.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Disable ANAT.
On: Enable ANAT.
SIP Authentication UserName
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid username.
SIP Authentication Password
This is the password part of the credentials used to authenticate towards the SIP proxy.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
A valid password.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration
Peripherals
Maintenance
SIP DefaultTransport
Select the transport protocol to be used over the LAN.
Requires user role: ADMIN
Default value: Auto
Value space: TCP/UDP/Tls/Auto
TCP: The system will always use TCP as the default transport method.
UDP: The system will always use UDP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS
connections a SIP CA-list can be uploaded to the video system. If no such CA-list is
available on the system then anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order: TLS,
TCP, UDP.
SIP DisplayName
When configured the incoming call will report the display name instead of the SIP URI.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 550)
The name to be displayed instead of the SIP URI.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
137
Administrator Guide
System settings
System settings
Appendices