Advertisement
STEP 2: (SEE FIGURE 2)
=
Hook the short end of the spring (M) into the hole in
the latch lock lever. Use the spring puller tool (P) to
hook the long end of the spring into the square hole
in the tongue. The spring puller tool can be stored
when finished.
STEP 4: (SEE FIGURE 4)
Lay the tongue (open side facing up) onto the wheel
support (2). Assemble the axle (9) through the wheel
support and the tongue.
FIGURE 4
FIGURE 2
STEP 3: (SEE FIGURE 3)
=
Assemble the end of the hitch bracket (8) down
through the slot at the front of the tongue. Fasten it
to the tongue using the hex bolt (B) and hex nut (H).
Tighten.
Assemble the hitch pin (N) and hair cotter pin (O) to
the tongue and hitch bracket.
STEP 5: (SEE FIGURE 5)
•
Assemble a washer (K), a thick washer (Q) a wheel
(6) with the valve stem facing out, and another
washer (K) onto the axle. Assemble a cotter pin (L)
to the axle. Press a hub cab (I) onto the washer (K).
Repeat on other end.
FIGURE 5
FIGURE 3
Advertisement
