Cancelling A Stored Callback Request; Camp-On Or Override - Siemens optiPoint 500 entry Operating Instructions Manual

Step by Step
G9
or
Ente r th e code !
F?9
or
or
Ente r th e code !

Cancelling a stored callback request

Precondition: You have stored a callback request.
C
Lift the handset.
GB
or UK code or Standard code
Enter the code which has been programmed for you.
I
Replace the hand set.

Camp-on or override

In order to camp-on or override, you must have the cor-
rect class of service.
Depending on the configuration of your telephone, Sys-
tem Sup port will have programmed either "camp-on" or
"override".
Precondition: The internal station user whom you
have called is busy. You need to contact this person ur-
gently.
F:B
UK code or Standard code/Euro code
Enter the code which has been programmed for you.
Camp-on (call waiting):
The user hears an alerting tone in the course of the call.
The "Call pickup" key flashes on his telephone. If his
telephone has a display, your name and number are in-
dicated.
Override (call entering/intrusion):
The user hears an alerting tone.
You can speak immediately.
Camp-on is not p ossib le if the called party is pro-
tected by camp-on rejection or station override
security.
If you don't get through...
21 21 21 21