3-Dimensional Design - Epson FX-80 User Manual

That's a good start. To complete the program, add 7-dot line spacing
and a loop to process the last five lines of DATA:
100 LPRINT CHR$(27)"1"
690 FOR K=l TO 6
770 LPRINT: NEXT K: LPRINT CHR$(27)"@": STOP
1199 '
«(
LOGO DATA
»)
1210 DATA O,126,1,O,126,1,-5,O,O,1,2,4,9,
18,36,-16,8,32,4,32,4,16,8,O,128
1220 DATA O,O,O,64,32,16,72,36,-3,16,4,34,
65,O,O,65,34,-8,16,4,18,9,4,2,1,O,-9,O,O,128
1230 DATA -8,O,O,64,32,16,72,36,16,-7,
4,16,36,65,O,O,1
66,36,16,-3,4,16,4,18,9,4,2,1,-2,O,O,128
1240 DATA O,32,16,64,8,64,-15,8,32,72,16,
32,64,-6,O,O,O,127,O,O,127,O,O,O,128
1250 DATA"-7,0,0,0,8,4,16,2,16,-15,2,8,18,
36,72,16,32,64,-2,O,O,128
Figure 14·2. Double·S logo.
And there you have it ... Figure 14-2, a genuine logo which could be
used on all types of correspondence. SAVE this program as LOGO.
3-Dimensional Design
With a little imagination and creativity, a lot can be done with dot
graphics. Take a look at the 3-dimensional design of Figure 14-3,
which spells out the name of your favorite printer.
158