Canon EOS C700 Instruction Manual page 218

Specifications
• Lens Correction
Peripheral illumination/chromatic aberration correction is available for Canon EF lenses, EF Cinema lenses and
broadcast lenses
2
Some lenses are not compatible with in-camera correction.
218
• Shutter Speed
Speed (1/3-stop increments or 1/4-stop increments), angle, clear scan, slow, off
• Iris
Manual (1/2-stop increments or 1/3-stop increments, fine adjustment available), push auto iris,
automatic aperture
• ISO Speed
Z[ ISO 100 to ISO 102400 ]
• Gain
Z[ –6 dB to 54 dB, ]
Z[ –2 dB to 54 dB, ]
3
When slow & fast motion recording is not activated.
• ND Filter: Built-in (Off, 2, 4, 6, 8 or 10 stops), motor operated
• Exposure: AE shift, light metering modes (standard, spotlight, backlight)
• White Balance
Auto white balance (AWB); custom white balance (2 sets, A and B); user-set white balance (5 settings,
2,000 K to 15,000 K); two preset settings (daylight, 5,600 K
Color temperature and color compensation (CC) adjustment available for all settings except AWB.
4
Color temperatures are approximate and given for reference purposes only.
• Focus
Manual focus
Z only: Also autofocus (one-shot AF, AF-boosted MF, continuous AF); face AF and subject tracking
available
Z AF type: Dual Pixel CMOS AF, contrast-detection AF
• Sensor Sensitivity (ISO 800, 2000 lux, 89.9% reflection)
59.94 Hz: Z[ F10 ] F14 (2048x1080 at 59.94P)
50.00 Hz: Z[ F11 ] F16 (2048x1080 at 50.00P)
• S/N Ratio (Typical, using Canon Log 2, 1600% dynamic range)
68 dB (1920x1080 at 29.97P (59.94 Hz) or 25.00P (50.00 Hz), Z[ ISO 800,
] ISO 1600)
• Subject Illumination (ISO 25600, with a f/1.2 lens, 100% output)
59.94 Hz: 0.45 lux (shutter speed 1/30)
50.00 Hz: 0.38 lux (shutter speed 1/25)
• Built-In Microphone: Monaural electric condenser microphone
• Size of Photos: 2048x1080, 1920x1080
Terminals
• SDI OUT Terminals (SDI OUT 1 to SDI OUT 4) / MON. Terminals (MON. 1 and MON. 2)
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced
3G-SDI: SMPTE 424, SMPTE 425, SMPTE ST 299-2
HD-SDI: SMPTE 292, SMPTE ST 299-1
Embedded audio, time code (VITC/LTC)
LUT (BT.709, BT.2020, DCI, HDR (SMPTE ST 2084), ACESproxy) and supplemental displays* (superimposed
onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false color display,
anamorphic desqueeze) can also be output.
* MON. terminals only.
2
3
ISO 200 to ISO 102400 (1-stop or 1/3-stop increments)
3
–6 dB to 48 dB (3-dB increments),
3
–2 dB to 48 dB (fine adjustment in 0.5-dB increments)
4
and tungsten lamp, 3,200 K
4
)