D-Link DNS-722-4 Quick Installation Manual page 12

Attach the External Power Supply
Attach the external power supply to the
DC power receptacle located on the
NVR's rear panel (labeled DC12V) and
connect the other end to an AC power
outlet.
Turn on the Power and Initialize
the HDD
Push the power button at the front panel.
The LED on the NVR will begin to blink.
When you have a proper connection,
wait about 60 seconds, the NVR power
LED will stay steady and the HDD and
network LEDs will begin to blink. The
NVR will initialize the HDD to default
settings. To change HDD settings, please
visit the SETUP page in the web-based
configuration utility.
Supported Cameras
DNS-722-4: Supports all D-Link network
cameras. Includes support for auto-discovery,
and up to 1.3 megapixel resolution.
DNS-726-4: Supports known-brand
network cameras including D-Link, Axis,
Panasonic, and SONY. Specific feature
support depends on software.
D-Link DNS-722-4/726-4 Quick Install Guide
11