Switching On For The First Time - Philips Digital Set Top Box DTR210 User Manual

Switching on for the first time

1 Connect your equipment according to the appropriate
system diagram given on the previous pages and power
up/turn on the equipment.
During initialisation the indicator on the front panel will
flash red for a few seconds and then remain off. If the indi-
cator is red (stand by) press the Power key on the
remote control.
The front panel indicator will now be off.
2 To switch off the set top box, press Power again.
With the Set Top Box on, the FIRST TIME INSTALLA-
TION window displays. You are asked to enter the type of
TV set you are using.
3 Use the keys to choose either NORMAL 4:3 or
WIDESCREEN 16:9.
4 Press the key to start installation.
The following message displays.
5 Use the keys to highlight Yes and then press
the key.
The system then starts to search all channels for available
radio and TV stations. This may take a few minutes.
The stations found are listed in the centre panel.
A progress bar below the listing panel shows the channels
searched so far within the scan range (21 - 68).
When scanning has finished, the received stations are
automatically arranged in numerical order.
ETTING TARTED
G S
10
The TV set then plays the station at the top of this sorted
list. The Info box for the TV station playing displays for a
short time. The TV station continues to play the pro-
gramme.
Note: Your receiver, as with any electronic equipment, con-
sumes power. In order to reduce power consumption, please
switch your receiver to standby when not in use. If you will not
be using your receiver for a long period of time, we recommend
unplugging it from the mains outlet.