Table of Contents
Advertisement
8.2 Network Parameters
This section provides the list of network parameters and describes parameter details.
Symbols, M and N, used in the "Parameter No." column
M and N in "Parameter No." in this section denote the following:
Indicates the module number.
• N: F
Indicates the network type
• M: F
Table8.14 For CC-Link IE controller network and MELSECNET/H (
M
1
H
2
H
5
H
A
H
B
H
D
H
E
H
M
0
H
1
H
2
H
.
CC IE Control (Control station)
Extended mode (Control station), MELSECNET/10 mode (Control station)
CC IE Control (Normal station), MELSECNET/H mode (Normal station), MELSECNET/H
Extended mode (Normal station), MELSECNET/10 mode (Normal station)
MELSECNET/H (Remote master)
MELSECNET/H (Standby station)
MELSECNET/H mode multiplexed remote I/O network master station
MELSECNET/H mode multiplexed remote I/O network sub-master station
(when no parameter is set)
MELSECNET/H mode multiplexed remote I/O network sub-master station
(when parameters are set)
Table8.15 For CC-Link setting (
Master station
Local station
Standby master station
Network type
MELSECNET/H mode (Control station), MELSECNET/H
,
(4) in this section)
Network type
CHAPTER8 PARAMETERS
(1), (2) in this section)
8 - 20
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
