Introduction; What You Can Do Using The W-E1 - Canon w-e1 Instruction Manual

Introduction

Wi-Fi Adapter W-E1 is an accessory that enables Wi-Fi (wireless
communication) functions when installed in the SD card slot of the
EOS 7D Mark II, EOS 5DS, or EOS 5DS R.
The wireless communication functions available with the W-E1 are as
follows.

What You Can Do Using the W-E1

(1) q Communicate with a smartphone
Connect the camera to a smartphone or tablet wirelessly and use
the dedicated application "Camera Connect" to do the following.
• View images stored in the camera on a smartphone or save
viewed images to a smartphone.
• Operate the camera to shoot still photos or change camera
settings using a smartphone.
In this manual and on the camera's LCD monitor, "smartphone"
refers to smartphones and tablets.
(2) D Operate remotely using EOS Utility
Connect the camera to a computer wirelessly and operate the
camera remotely using EOS Utility (EOS software).
Images cannot be recorded on the W-E1. Be sure to prepare a CF card

for recording images.
Depending on the transmission range and connection status, image display

may be delayed, images may not be displayed smoothly, or shutter release
timing may be delayed.
Note that Canon cannot be held liable for any loss or damage from

erroneous wireless communication settings for using the W-E1. In addition,
Canon cannot be held liable for any other loss or damage caused by use of
the W-E1.
When using wireless functions, establish appropriate security at your own

risk and discretion. Canon cannot be held liable for any loss or damage
caused by unauthorized access or other security breaches.
2
(p.21, 53)
(p.27, 59)