Clutch Switch - Craftsman 917.20402 Operator's Manual

KNOW YOUR TRACTOR
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR TRACTOR
Compare the illustrations withyourtractorto familiarize yourself with the locations ofvarious
controls and adjustments. Save this manual for future reference.
Our tractors conform to the applicable safety standards of the
Amedcan National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used to
raise and lower the mower or other attach-
ments mounted to your tractor.
(B) CLUTCH/BRAKE PEDAL - Used for
declutching and braking the tractor and
starting the engine.
(C) PARKING BRAKE- Locks clutch/brake
pedal into the brake position.
(CC) PARKING BRAKE SYMBOL - Indi-
cates a starting fault when the parking brake
is disengaged,
(D) THROTTLE CONTROL- Used to control
engine speed.
(E) ATTACHMENT CLUTCH SWITCH °
Used to engage the mower blades or other
attachments mounted to your tractor.
(EE) BLADE SWITCH SYMBOL- indicates
a fault when the attachment dutch switch
is engaged.
(F) SMARTSWITCH IGNITION (SSI) BUT-
TON- Used for starting/stopping engine and
communicating status updates,
(G)* REVERSE OPERATION SYSTEM
(ROS) - Allows operation of mower deck or
other powered attachment while in reverse,
(H)* HEADLIGHT BUTTON - Turns the
headlights on/off.
(i)*BATTERYINDICATOR BUTTON- Used
to indicate lowbattery voltage or a charging
system fault.
(J) MOTION CONTROL LEVER - Selects
the speed and direction of tractor.
(M) FREEWHEELCONTROL. Disengages
transmission for pushing or slowlytowing the
tractor with the engine off.
(P) SERVICE MINDER/HOUR METER -
Indicates when service is required for the
engine and mower.
* NOTE: G, H, and I are also used as the
numerical input buttons for entering the
passcode,
10