Table of Contents
Advertisement
RT430/434
38
Operating within this range supports the highest degree of equipment reliability, even
though the equipment data sheets may state wider ranges of minimum and
maximum temperature and humidity (for example, -40° C to 55° C and 5% to 95%
RH). Continuous equipment operation at the minimum and maximum limits is not
recommended.
Keep panel sealed to avoid dust and/or animals and insects.
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the device and into the air intake
vents.
It is recommended weekly or every two weeks to access the web interface area of
the unit and check the equipment details in Status area. See Operation chapter for
further details regarding the equipment status.
If any abnormal conditions are observed, refer to Maintenance chapter or contact
the technical support team to obtain the suitable instructions to deal with the issue.
Chapter 4 – Installation
RT430/434
Advertisement
Table of Contents
