Panasonic KX-TD816 Programming Manual page 410

5.1 Optional Programming
Area Bit
05 7 [For VM DPT Integration]
Enables or disables sending the Follow
On ID when an outside call is routed to
a voice mail port by IRNA.
[For VM Inband Integration]
Enables or disables sending the Follow
On ID when an outside call is routed to
a voice mail port by IRNA.
• When the port is in AA service
mode;
enable: the mode will change to the
VM service mode.
disable: the mode will not be
changed.
• When the port is in VM service
mode;
enable: the mode will not be
changed.
disable: the mode will change to the
AA service mode.
8 Reserved
9 Enables or disables dial tone 2 when an
extension sets programmable extension
features such as Call Waiting.
10 Determines the result when pressing the
FLASH button during an outside call
(When Area 01-bit 3=0).
Flash: Disconnects and accesses the
same outside line.
Terminate: Terminates the outside line
and accesses the intercom. It is
convenient to route the outside call
according to ARS if ARS is active.
11 Selects the message waiting ring type: 3
quick rings or 2 normal rings, for single
line telephones.
410
Explanation
Description Selection Default
0 : enable
1 : disable
0 : disable
1 : enable
0 : Terminate
1 : Flash
0 : 3 times by
40 ms
1 : 2 times by
280 ms
Features Guide
References
1 • Voice Mail
Integration for
Digital
Proprietary
Telephones
• Voice Mail
Integration for
Inband
1 None
1 Flash
1 Message Waiting
Optional Programming