Mode 1
Mode 2
(Default)
Mode 3
Mode 4
If the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a)
b)
If a call is not terminated after going on-hook, the above cases occur. To avoid these
problems, choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless
the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and
Mode 4.
•
Hold Alarm tone pattern has a default. (
User Manual References
User Manual
1.4.2 Holding a Call
Hold
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
When an SLT user receives a call, reorder tone is heard or nobody answers the
call.
When an SLT user goes off-hook, reorder tone is heard instead of a dial tone.
Transfer to Trunk
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
4.2.1 Tones/Ring Tones).
1.12 Holding Features
Transfer to Extension
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.
Feature Guide
133