Table of Contents
Advertisement
Understanding This User Guide
This user guide introduces you to our technology and all the advantages
of your new phone – through easy-to-follow instructions.
Sections break down categories of information to progressively take
you all the way from learning the basics to using the most advanced
phone features.
Tips highlight special shortcuts and timely reminders to help you
make the most of your new phone.
The Table of Contents and Index help you locate specific
information quickly.
We know that your time is valuable and that's why we've designed this
guide to be used in a building block format or in stand-alone sections.
You'll get the most out of your phone if you read each section. However, if
you'd like to get right to a specific feature, you'll be able to locate its section
using the colored tabs. Follow the instructions in that section and you'll be
ready to use your phone in no time.
Tip:
If you're viewing this user guide from your computer, simply click on
a topic in the Table of Contents or Index, or on any page reference within
a section to go directly to that topic.
Turning Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press
END
PWR
Once your phone is ON, it displays "Searching for Service" indicating that
your phone is searching for a signal. When your phone finds a signal, it
automatically enters Standby mode – the phone's idle state. At this point,
you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. When a signal is found, your
phone automatically returns to Standby mode.
Section 1
2
Getting Started
for approximately two seconds.
In Power Save mode, your phone searches for a signal periodically without
your intervention. You can also initiate a search for network service by
pressing any key (when your phone is turned ON).
Tip:
The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
Turning Your Phone OFF
Press
for two seconds until you see the powering down animation on
END
PWR
the display screen.
Your screen remains blank while your phone is off (unless the battery
is charging).
Getting Started
Determine if Your Phone is Already Activated
If you received your phone in the mail, it probably has been activated. All you
need to do is unlock your phone.
If your phone is not activated, contact your wireless service provider.
Unlocking Your Phone
Follow these steps to unlock your phone:
Press and hold
to turn the phone on.
1.
END
PWR
Highlight
and press
.
2.
Unlock
OK
Enter your four-digit lock code. For security purposes, the code is not
3.
visible as you type.
Tip:
If you can't recall your lock code, try using the last four digits of
either your Social Security number or phone number or try 0000. If none
of these work, call your wireless service provider.
Activating Your Phone
If your phone was not activated already, call your wireless service provider
for assistance.
Section 1
Getting Started
3
Advertisement
Table of Contents
