Before Site Survey By Using Ps - Panasonic kx-ns0154la Installation Manual

5 Appendix

5.5.1 Before Site Survey by Using PS

If you are using a KX-TCA185/KX-TCA285/KX-TCA385, you can skip this procedure.
The section describes the preparation procedure for the Site Survey using one the following PSs.
•
For North America: KX-WT125/KX-WT126/KX-TD7685/KX-TD7695/KX-TD7696
•
For South America: KX-WT115
•
For other countries/areas: KX-TCA155/KX-TCA175/KX-TCA256/KX-TCA275/KX-TCA355/KX-TCA364
Note
Display prompts for the site survey are only available in English.
Checking the CS ID Number
Check the CS ID number label attached to the CS. If the CS ID number label is not attached to the CS, check
the CS ID number using Web Maintenance Console. For details, refer to "CS Information" in the PC
Programming Manual for your PBX.
Assigning the CS ID Number to the PS
Using the KX-WT125/KX-WT126 (for North America)
WXYZ
While pressing 1 and 9,
insert the batteries,
and hold down 1 and 9
for 2 seconds.
Note
To clear the CS ID number assigned to the PS, follow the procedure below:
WXYZ
While pressing 1 and 9,
insert the batteries,
and hold down 1 and 9
for 2 seconds.
42 Installation Guide
To enter letters
A:
B:
CS No.
ABC
0 to 7
To the Desired CS No.
To the initial display
To clear one by one
DEF
To clear all at once
To the initial display
+ C: +
OPER
+ D: +
CS ID No.
0 to 9 and A to F
CS No.
0 to 7
To the Desired CS No.
OR
E: +
ABC GHI
F: +
DEF
JKL