In/Out Cable Connection; Dp To Hdmi Dongle Product List - LG MP700 Owner's Manual

In/Out Cable Connection

To view images on the monitor that is not connected to the monitor docking port of MP700, you need to con-
nect the MP700 to the monitor via an RGB or DP Cable.
Attention
● RGB, DP(Display Port), LINE-OUT(Audio Port), and LAN cables are not included. You need to purchase
these separately, if needed.
● After cabling is complete, assign the SET ID of the monitor to be connected to MP700.
● To configure the SET ID, please refer to the owner's manual for your monitor.
Note
When using the SuperSign Manager software:
● The monitor's SET ID is a unique number used to identify the monitor. You can choose a number from 1
to 25. The SET ID allows the SuperSign Manager software to identify the monitor.
● In order to directly connect the monitor to the MP700, its SET ID must be set to 1.
● To use SuperSign Manager, the monitor that will be connected to a MP700 must support the LG RS232C
protocol. A monitor supporting the LG RS232C protocol can be controlled the monitor functions, such as
brightness and sound, using SuperSign Manager.

DP to HDMI dongle product list

As the MP700 does not have an HDMI output port, the DP to HDMI converting dongle that supports UHD
output should be used if 4K UHD HDMI output is required. Below are the DP to HDMI dongle vendor/product
lists. The sale of the products varies depending on the circumstances of each relevant vendor.
● BizLink: KS10047
● Wieson Technologies: G9857C219-026-H
9