Integration
The pole position identification is integrated into the system as follows:
Overview of important parameters:
S p0325
S p0329
S p1780.6
S p1980
S p1982
S r1984
S r1985
S r1987
S p1999
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Motor pole position identification current 1st phase
Motor pole position identification current
Selects pole position identification PEM without an encoder
(sensorless)
Pole position identification technique
Pole position identification technique
Pole position identification angle difference
Pole position identification saturation curve
Pole position identification trigger curve
Angular commutation offset calibration, scaling
Operating Modes
Vector control
3-157