1. Seat the cable end connector firmly over the serial COM port on the Smart Dock.
2. Turn the thumbscrews in a clockwise direction. Do not over tighten.
3. Secure the cables to the Thor VM3 with
4. Connect the other cable end to the desired serial device.
Connect a Tethered Scanner
1. The scanner cable is attached to either the COM1 or COM2 port on the Smart Dock.
2. Connect the serial cable for the scanner as directed above.
3. When the Thor VM3 is powered on, it provides power to the serial scanner.
4. Configure the Data Collection (DC) Wedge to manipulate scanned data as desired.
Connect Headset Cable
The CANbus/Audio connector supports a headset adapter cable or a CANbus cable. The Thor VM3 does not support con-
necting audio and CANbus simultaneously.
Headphones
See
CANbus / Audio Connector
1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
click!
3. Slide the cable ends together until they click shut. Do not twist or bend the connectors. The Thor VM3 internal
microphone and speakers are automatically disabled when the headset is connected.
4 - 42
Strain Relief Cable Clamps
Microphone
To Audio cable
(page 9-11) for connector pinouts.
(page 4-16).
To headset
To Audio
connector
on dock