Advertisement
Setting/Disabling Dual-Security Mode
Dual-Security Mode is a mode for prevention of passcode
exposure by first pressing two random numbers and then
entering the actual passcode.
Beep
Press [7] or [9] button, and
Open the battery cover and
shortly press the [register]
then [*] button to set or
disable the dual-security
button.
mode.
Setting/Disabling Dual-Authentication Mode
Dual-Authentication Mode is a mode with enhanced security
that only opens the door when both passcode and card are
recognized.
To set the dual-authentication mode, at least 1 card needs to
be registered.
Beep
Press [4] or [6] button, and then
Open the battery cover and
[*] button to set or disable the
shortly press the [register]
dual-authentication mode.
button.
Dual-Authentication Mode Gestures
Success : Beelililic
Fail : Short beep~
Touch the
When the number
[number keypad]
keypad lights up,
enter the passcode
and press the [*]
button.
Battery Replacement
When the battery replacement notification alarm sounds
If opening the door with passcode, card, or key tag triggers
"Fur Elise" melody, then it is time to replace the batteries.
(When the replacement alarm rings, the battery replace-
ment alarm
LED will be lit on. )
Replacing the battery
All 4 batteries must be replaced to new ones within 1
week of first sounding of the alarm.
- Depending on the door lock usage situation, following
number of batteries are inserted to be used.
Battery life for use may vary depending on its manufacturer,
manufactured date, and user environment.
(With 4 AA-type alkaline 1.5V batteries, about 10 months of use
based on 10 uses per day is possible.)
Caution
Liquid coming from batteries can damage the product, so please
check on this in regular basis (about once in 6 months).
After the battery replacement notification alarm is sounded, pass
code/card registration, changes, or feature setting cannot be
made until the batteries are replaced.
Use of Emergency Batteries
Not changing the batteries and continuing to use them when it
is time to replace the batteries will cause them to discharge,
preventing the doorlock from properly operating.
Opening the door with emergency batteries
Purchase the emergency battery (9V) from nearby
convenience store or electronics store.
- Rather than regular manganese battery or rechargeable battery, it
is best to use alkaline battery, which has longer operation life.
With the 9V battery contacting the outside power (emergency
battery) contact area on the outer side of the main unit, contact
the card or key tag, or enter the passcode.
Prank Prevention Feature
When the doorlock is erroneously operated from the outside,
this feature sounds an alarm as well as prevents the doorlock
from working.
Trying to open the door with unregistered card or key tag, or
incorrectly entering the passcode for five times or more, an
alarm is sounded, and the doorlock does not operate for 3
minutes.
Automatic/Manual Lock Feature
It is possible to set the automatic lock feature that automati-
cally locks the door when it is closed.
↑Beelililic
- Automatic Method : When the door is closed, the door locks automatically
in two seconds. But, it does not operate when the battery discharges.
[7] button:
dual-security mode
- Manual Method
[9] button:
closed, so the door locks when the [OPEN] button on the main unit of the
normal mode
inside is pressed, or the number keypad is touched.
Sound Setting/Disabling
The sound from entering the passcode, locking the door, or
opening the locked door can be adjusted. When the product
is first purchased, the default setting is to play all the sounds.
(Two levels)
1. Press the [Register]
button.
Open the battery cover and
shortly press the [register]
button.
↑Beelililic
- [0] button: Silence (excluding the alarm sound, all sound is disabled.)
[4] button:
dual-authentication
- [1]~[3] button: As the levels go up, the sound becomes larger.
mode setting
[6] button:
dual-authentication
Card automatic/manual detection setting
mode disabled
This is a feature for setting automatic or manual detection for
card or key tag.
Open the battery cover and
Success : Beelililic
shortly press the [register]
Fail : Short beep~
button.
Contact the card to the
[card recognition area]
Reference
Caution
Set the [automatic/manual lock]
switch inside the main unit to
"automatic A" / "manual M" position.
: The door does not lock automatically even when it is
2. Sound setting
Beep
Press the numbers between
[0~3] and then, [*] button to
set the sound.
Beep
[5] Button: Automatic
Detection Setting
[8] Button: Manual
Detection Setting
Press [5] or [8] button, and
then [*] button to Card
automatic/manual detection is
completed.
When setting the automatic detection, contacting to the card
recognition area will open the door.
When setting the manual detection, contacting to the card recognition
area after touching the [number pad] will open the door.
When the product is first purchased, it is set in automatic
detection mode, and when it is set to manual detection,
batteries can be used for a longer period of time.
Setting/Disabling Dual-Lock
Dual-Lock Feature is a feature to prevent the door from opening
from the outside.
Setting Dual-Lock
Feature
With the door locked, press
the [OPEN] button on the
inside for 3 seconds.
Dual-Lock Action
↑Beelililic
Beelilic~Beelilic~
Setting/Disabling Crime Prevention Feature
To prevent the intrusion from the outside when you are going
out, this feature triggers an emergency sound when the
doorlock is operated from the inside.
With the crime prevention in setting, pressing [OPEN] button
from the main unit on the inside triggers an emergency sound
for 5 minutes.
Setting Crime
Prevention Feature
↑Beelililic
When the door is locked, [
on the number keypad on the outside
lights up. Pressing [
3 seconds sets the crime prevention
feature.
Disabling Alarm Sound/Emergency Sound
After opening the battery cover on the main unit of the inside,
press the [register] button or take out the battery. Then,
contact the registered card or key tag, or enter the passcode,
and then press the [*] button.
Disabling Dual-Lock
Feature
Beelilic
BeeliBeeli
Shortly press the [OPEN]
button on the inside.
With the dual-lock feature in setting,
touching the number keypad from the
outside sounds an alarm, and the door
cannot be opened. But, if the manual
switchgear is changed to
direction,
then the door can be opened.
Disabling Crime
Prevention Feature
Beelilic
] button
After contacting registered card
or key tag, or entering the
] button within
passcode, press the [*] button.
Hide quick links:
Advertisement
