GE 74853a User Manual page 6

Operating the Clock
Setting the WAKE Time
Your digital clock operates on a 12-hour
standard mechanism. A green indicator
will be shown next to AM when the unit
is reading AM time.
1. Slide the SET switch to WAKE 1 or
WAKE 2. (An indicator is activated.)
2. Press REV or FWD to set the wake time.
The time decrements or increments will
follow by a faster rate when you press
and hold either REV or FWD.
3. After WAKE time is set, slide the SET
switch to LOCK position.
Tip: The unit equips with GRAD-U-WAKE
feature, the alarm tone volume will in-
crease gradually to its maximum in about
30 to 45 seconds.
Tips: If you set SLEEP function with low
volume level before going to bed, we ad-
vise using ALARM
since its volume will automatically increase.
7-4894 EN-US
Waking by Selected Source
Programme
You may be woken up by music
alarm
1. Select an AM or FM station.
2. Set wake time (see above direction).
3. Press the WAKE 2 or WAKE 1 button
to select waking up by music or alarm.
A green indicator is up next to the se-
lected setting.
4. Adjust the volume by turning VOLUME.
Note: When you turn off the alarm
GRAD-U-WAKE GRAD-U-WAKE GRAD-U-WAKE GRAD-U-WAKE
the music
alarm
same time tomorrow.
mode to wake you up
6
or
.
or
by pressing ON/OFF ON/OFF, the ON/OFF ON/OFF ON/OFF
or the music will turn on at the
5
1/6/03, 8:33 AM
EN