1-1-2. Front Panel
(1) Remove the top cover. (Refer to item 1-1-1.)
(2) Disconnect the flexible cable (1).
(3) Disconnect the flexible cable (2) and two connectors (3).
(4) Remove two screws (4) and two ground wires (5) and (6).
(5) Release four claws and remove two screws (7).
(6) Remove the front panel (8).
1-1-3. Tray Door
(1) Remove the front panel. (Refer to item 1-1-2.)
(2) Remove the Front (R) PC board. (Refer to item 1-2-4 (2) to (4).)
(3) Remove the spring (1).
(4) Remove the tray door (2) while slightly bending it.
Screw (4)
Ground wire (6)
Connector (3)
Ground
wire (5)
Claw
Claws
Screws (7)
Tray door (2)
Screw (4)
Flexible cable (1)
Claw
Front panel (8)
Fig. 2-1-2
Fig. 2-1-3
Flexible cable (2)
Connector (3)
Spring (1)