Related Manuals for Panasonic NV-FJ630PMP
Summary of Contents for Panasonic NV-FJ630PMP
- Page 1 VQT9630 Video Cassette Recorder NV-FJ630PMP NV-SJ430PMP Operating Instructions Instrucciones de funcionamiento Before attempting to connect, operate or adjust this product, please read these instructions completely.
-
Page 2: Dear Customer
Dear Customer Thank you for purchasing this Panasonic Video Cassette Recorder. We strongly suggest that you carefully study the Operating Instructions before attempting to operate the VCR, and that you note the listed precautions. CVC (Crystal View Control) Indicator The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. -
Page 3: Table Of Contents
Infra-red Remote Controller ... 06 ≥Installing the Batteries ... 7 Setting Up Connections ... 08 Tuning the TV to your VCR ... 11 ≥Plug in Auto Tuning ... 11 Storing TV Broadcasts in your VCR ... 13 Setting the Remote Controller for Operation of your TV ... -
Page 4: Controls And Connection Sockets
Controls and Connection Sockets This section describes in detail the function of each button, switch and connection socket. NV-FJ630PMP POWER TIMER REC SEARCH Í/ I Á NV-SJ430PMP POWER TIMER REC SEARCH Í/ I Á JET REW PICTURE MODE VIDEO AUDIO... - Page 5 – NAVI INDEX SEARCH PICTURE MODE MENU JET REW DATE – – – CANCEL SPEED PROG. / CHECK TIMER Á AUDIO RESET OSD/DISPLAY VCR/TV § Set VCR/TV switch to VCR for using POWER Í, the I and J buttons. §...
-
Page 6: Infra-Red Remote Controller
Infra-red Remote Controller The remote control unit for this VCR is a universal remote controller. As such, some of its buttons are not used to operate this VCR. VCR OPERATION POWER DIRECT REC REPEAT Í NAVI INDEX SEARCH PICTURE MODE... -
Page 7: Installing The Batteries
TV OPERATION § Set VCR/TV switch to TV for using POWER Í, the I and J buttons and the numeric buttons. POWER INPUT SELECT DIRECT REC REPEAT Í VOLUME NAVI INDEX SEARCH PICTURE MODE MENU JET REW DATE – –... -
Page 8: Connections
TV. To mains supply ≥Use the plug adaptor supplied if it is needed to fit the shape of the power outlet which will be used. ≥Connection to a Stereo Amplifier (NV-FJ630PMP only) Stereo Amplifier (Not supplied) TV Set (Not supplied) - Page 9 Connection to a TV using the Audio/Video Input Sockets NV-FJ630PMP To mains supply NV-SJ430PMP To mains supply TV Set (Not supplied) Antenna Input Connector AUDIO IN VIDEO IN (Not supplied) VIDEO AUDIO TV Set (Not supplied) Antenna Input Connector AUDIO IN...
-
Page 10: Cable Connection
Band, Ultra-Band, and Special cable channels (Channels A-5–A-1, A–W, AA–FFF, GGG– WWW, WWWr1–WWWr12, 100–125, 5A). Also, the VCR can tune to any of the 56 UHF channels (14–69). Refer to Storing TV Broadcasts in your VCR on page 13. BASIC Hook-Up... -
Page 11: Tuning The Tv To Your Vcr
Á AUDIO RESET OSD/DISPLAY VCR/TV The VCR supplies a signal to the TV via the RF coaxial cable on channel US3 or 4. It is possible to view the video picture on your TV in the same way that you watch TV broadcasts. - Page 12 To Restart Plug in Auto Tuning 1 Press EJECT < and remove the video cassette. 2 Keep the I and J buttons on the VCR pressed simultaneously for 3 seconds or more during the VCR on. ≥The channel displayed on the VCR display...
-
Page 13: Storing Tv Broadcasts In Your Vcr
Storing TV Broadcasts in your VCR Auto Tuning Using the On Screen Display The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary. - Page 14 CHANNEL RECEIVED FROM CABLE 2–13 A-5–A-1 BAND SUPER A–W BANDS AA–FFF BAND GGG–WWW WWWi1– ULTRA WWWi12 BAND 100–125 SPECIAL CATV CHANNEL SELECTION & INDICATION ON VCR 2–13 14–69 CHANNEL SELECTION & INDICATION ON VCR 2–13 95–99 14–36 37–65 66–94 100–125...
-
Page 15: Setting The Remote Controller For Operation Of Your Tv
Notes: ≥If you are using a Panasonic TV, this setting has already been made, and so you do not need to perform the above setting procedure. However, this remote controller may not work with some Panasonic TVs. -
Page 16: Setting The Clock Of Your Vcr
It employs the 24-hour system. Preparations ≥Confirm that the TV is on and the VCR viewing channel is selected. ≥Turn on the VCR. ≥Press VCR/TV to select the VCR mode. -
Page 17: Settings Using The On Screen Display
Settings Using the On Screen Display Preparations ≥Confirm that the TV is on and the VCR viewing channel is selected. ≥Turn on the VCR. ≥Press VCR/TV to select the VCR mode. On Screen Display 1 Press MENU. 2 Select OPTION by pressing 3 or 4 and then press OK. - Page 18 4 Tape running display Stop, Eject Rewind, Review, Index Search :, Jet Search 6, Jet Rewind Fast forward, Cue, Index Search 9, Jet Search 5 Playback Recording Recording pause Repeat playback 5 Present time/Tape counter/Remaining tape time/Index search Information Present time Tape counter Remaining tape time Index search...
- Page 19 JET SEARCH 4 Select ON or OFF by pressing 2 or 1. ≥When JET NAVIGATOR is ON, appears on the VCR display and Jet Navigator function works. 5 Press MENU twice to make the on screen display disappear. ≥See pages 30–32 for details on the Jet Navigator function.
-
Page 20: To Select The Desired Language
(In a case like this, press AUDIO and select the right sound.) ≥This function works only for a cassette which AudioTrack has been recorded by a video recorder equipped with Panasonic’s Auto Bilingual Hi-Fi Choice function. ≥The function will not work with a cassette Left... -
Page 21: Playback
TIMER Á AUDIO RESET OSD/DISPLAY VCR/TV Note: ≥If you keep 5 (FF) or 6 (REW) pressed in step 3 or 4, search playback is activated while the button is pressed, and operation returns to normal playback when the button is released. -
Page 22: Jet Search
To Activate the Playback Off Timer Function During normal playback, press 1 (PLAY) on the VCR for more than 2 seconds to put the VCR in the Playback Off Timer mode. After that, press 1 (PLAY) on the VCR repeatedly until the desired playback duration is displayed on the VCR display. -
Page 23: Using The Remote Controller
(at least 5 sec.) Notes: ≥Repeat Playback function does not work during Play-Off Timer. ≥Press ∫ (STOP) to release the VCR from the Repeat Playback mode. To Playback in the Desired Picture Quality (Picture Mode) This function reproduces optimum playback picture from various kind of recorded tapes and contents. -
Page 24: Manual Recording
– – CANCEL SPEED PROG. / CHECK AUDIO RESET OSD/DISPLAY VCR/TV § Set VCR/TV switch to VCR for using POWER Í, the I and J buttons and the numeric buttons. SEARCH JET REW PICTURE MODE Operations 1 Insert a video cassette tape VOLUME –... - Page 25 Recording Another One 1 Refer to steps 1–4 of the manual recording operation. 2 Press VCR/TV to select the TV mode. 3 Select the TV program on your TV that you wish to view now. ≥Ensure that VCR/TV switch is set to TV.
-
Page 26: One-Touch Recording (Otr)
Operations 1 Ready the video source which is to be recorded, and start recording. 2 Press ¥ REC/OTR on the VCR repeatedly to select the desired recording duration. ≥The VCR will automatically switch off when OTR is completed. To turn the VCR on again, press POWER Í... -
Page 27: Timer Recording
Preparations ≥Insert a video cassette tape with an intact erasure prevention tab. ≥Confirm that the TV is on and the VCR viewing channel is selected. ≥Turn on the VCR. ≥Check that the clock is set to the correct time. - Page 28 End (Auto SP/EP Change Function ) If, during a timer recording performed in the SP mode, the VCR determines that the remaining tape time is insufficient to record the program to its end, the Auto SP/EP Change function automatically changes the tape speed to EP to ensure that the whole program will be recorded.
- Page 29 ≥Every time you press SPEED, the indication changes in the following order: SP>EP>A>SP Checking a Timer Program ≥The VCR must be turned on, or the timer recording indicator “Á” lit. ≥Confirm that the TV is on and the VCR viewing channel is selected.
-
Page 30: Search Functions
Search Functions Jet Navigator This VCR can display a list of the recorded programs on the inserted video cassette on the TV screen. You can then select the desired program, and the VCR will quickly locate its beginning and start playback. - Page 31 In this case, press NAVI at a portion of the tape where a program has been recorded of this VCR. This will allow signal checking to be performed more reliably. When a signal can still not be found, [CAN NOT FIND JET...
-
Page 32: Time Stamp Function
(called Time Stamp) appears on the TV screen for approx. 5 seconds. Preparations ≥Display the VCR picture on the TV. ≥Be sure to set OSD to ON. (See page 17.) Erased ≥Press VCR/TV to select the VCR mode. -
Page 33: Vhs Index Search System
≥Load the pre-recorded video cassette. Operations 1 Press SEARCH. (This operation is performed while the VCR is off or while the VCR is in the stop mode or normal playback mode with the VCR on.) ≥The tape is rewound to the beginning, and... -
Page 34: Editing
Video movie camera Operations 1 Search for the end of the previous recording 2 Press ;/D (PAUSE/SLOW). 3 Press REC ¥ to switch the VCR from the 4 Start the new recording by pressing 5 Press ∫ (STOP) to stop recording. Notes: ≥The new sound will be recorded on both the... -
Page 35: Other Functions
≥For vertical locking adjustment Use the I and J buttons to minimize any vertical jitter during still picture playback. § Set VCR/TV switch to VCR for using the I and J buttons of remote controller. Automatic Switching Off and Ejection... -
Page 36: Before Requesting Service
‘ The AC power cord has not been connected. Connect the AC power cord to the main AC power. “The VCR display is illuminated but the VCR will not operate.” ‘ The VCR is in the timer mode. Press TIMER Á (TIMER REC Á) to operate the VCR manually. - Page 37 Horizontal bars or lines run down the screen.” ‘ Tracking is not correct. Adjust the tracking. See page 35. ‘ The TV has not been tuned to the VCR. Tune the TV to the VCR. See page 11. ‘ The video heads are clogged or worn.
-
Page 38: Usage Precautions
Please read these precautions before you operate this VCR. Avoid Sudden Changes in Temperature If the VCR is suddenly moved from a cold to a warm place, dew may form on the tape and inside the VCR. Humidity and Dust... - Page 39 Dirt on the video heads If the video heads get dirty, pictures will not be recorded or played back clearly. (See the following conditions.) Small Normal amount picture of dirt If this happens, insert and eject a cassette 5–10 times successively to remove the dirt from the video heads.
-
Page 40: Specifications
2 channels (Hi-Fi sound-stereo) (NV-FJ630PMP only) Color; more than 200 lines Video; more than 38 dB/SP Audio; more than 40 dB/SP Audio; more than 90 dB (Hi-Fi audio track) (NV-FJ630PMP only) 60 Hz–12 kHz/SP 20 Hz–20 kHz/Hi-Fi (NV-FJ630PMP only) 0.005% Wrms/Hi-Fi (NV-FJ630PMP only) 5oC–40oC... - Page 41 ENGLISH Important Information To loose a Cable Strap: Push up a strap in the direction of the arrow, pushing a Lock Tab. ESPAÑOL Información importante Para aflojar la Correa de cable: Levante la correa en el sentido de la flecha, empujando la Lengüeta de bloqueo. Cable Strap/ Correa de cable Lock Tab/...