1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. VCR
  5. AJ-D455
  6. Menu information

Panasonic AJ-D455 Menu Information

Panasonic broadcast camera menu information
Hide thumbs Also See for AJ-D455:
Table of Contents

Advertisement

Quick Links

Download this manual
Panasonic Broadcast
AJ-D455
Menu Information

Advertisement

Table of Contents
loading

Related Manuals for Panasonic AJ-D455

Summary of Contents for Panasonic AJ-D455

  • Page 1 Panasonic Broadcast AJ-D455 Menu Information...

  • Page 2: Setup (Default Settings)

    Setup (default settings) The unit’s major settings are performed by making selections on menus. The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3 connector in the unit's connector area are hooked up. The menus can be output to the SDI OUT 3 connector as well when the AJ-YA455P component serial interface board is used.

  • Page 3: Setup Menus

    Setup menus This unit can store up to 5 user files (user 1 to user 5) containing different menu settings, and these files can be selected and used. Changing the file Press the MENU button. Hold down the FILE button and press the cursor button file.
  • Page 4 Lock mode can be set to protect the settings in the system files and user files (USER2 – USER5). Settings can no longer be changed when this mode is set. To set and release the lock mode for the system files and user files use setup item No. 30 (MENU LOCK) and setup menu item No.
  • Page 5 Setup menus The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files. USER1 Loading a user file Press the MENU button.
  • Page 6 Saving a user file Press the MENU button. While holding down the FILE button, press the Press the button and move the cursor ( ) on the menu screen to setup item No. A01 (SAVE). SETUP-MENU <USER1> 723 DV PB ATT A00 LOAD A01 SAVE A02 P.ON LOAD...

  • Page 7: System Menu

    Setup menus SYSTEM menu <SYSTEM> Item Superimposed display SYS SC COAR. SYS SC FINE SYS H ENCODER COARSE FINE AV PHASE VIDEO LEVEL SET UP LEVEL The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 System phase rough adjustment: 90 units <Note>...
  • Page 8 SYSTEM menu <SYSTEM> Item Superimposed display CHROMA LEVEL SYS H OFFSET SYS SC/H MENU LOCK The underline on the setting item denotes the initial setting. Video output signal adjustments The SYSTEM menu item No. 03 (ENCODER SEL) and No. 22 (SYS SC/H) settings are used to make the video output signal adjustments.

  • Page 9: User Menu

    Setup menus USER menu <BASIC> Item Superimposed display P-ROLL TIME CHARA H-POS CHARA V-POS DISPLAY LOCAL * The SERIAL OUT 3 con- nector functions only when the AJ-YA455P serial interface board (optional accessory) is used. The underline on the setting item denotes the initial setting. Setting Superimposed display...
  • Page 10 USER menu <BASIC> (continued) Item Superimposed display TAPE TIMER CHARA TYPE REMAIN * The SERIAL OUT 3 con- nector functions only when the AJ-YA455P serial interface board (optional accessory) is used. The underline on the setting item denotes the initial setting. Setting Superimposed display...
  • Page 11 Setup menus USER menu <OPERATION> Item Superimposed display SHTL MAX FF. REW AUDIO MUTE ALARM PLAY DELAY CAP.LOCK EJECT EE F/R EE SEL STOP EE AUTO REW The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 This sets the maximum speed for shuttle operations.
  • Page 12 USER menu <OPERATION> Item Superimposed display MEMORY STOP INHIBIT REC INH LAMP EJECT SW The underline on the setting item denotes the initial setting. (continued) Setting Superimposed display 0000 This selects whether the VTR is to stop automatically when the counter value reaches “0” during a fast forwarding or 0001 rewinding operation in the CTL mode.
  • Page 13 1: DVCPRO’s, own ID is returned (F0 33H). 2: The unit’s own ID (A0 3CH) is returned. <Note> Set “ORIG” only when the unit is connected with a Panasonic controller (such as the AJ-A900, optional accessory). These settings are for selecting whether the RS-232C con-...
  • Page 14 USER menu <EDIT> Item Superimposed display STD/ NON-STD SERVO EDIT RPLCE1 EDIT RPLCE2 EDIT RPLCEC AUD EDIT AUD EDIT The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 AUTO This selects STD or NON-STD in accordance with the com- posite input signal.
  • Page 15 Setup menus USER menu <EDIT> (continued) Item Superimposed display AFTER CUE-UP AUD MEM UNIT VAR STEP VAR FWD VAR REV JOG STEP The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 STOP This selects the mode after cue-up operation is complete. 0: STOP mode 0001 STILL1...
  • Page 16 USER menu <EDIT> (continued) Item Superimposed display JOG FWD JOG REV The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 +4.1 This sets the maximum JOG FWD speed. 0: +4.1 (+3.1 ) speed 0001 +1.85 1: +1.85 (+1.85 ) speed 0002 2: +1 (+1 ) speed...

  • Page 17: Tape Protect

    Setup menus USER menu <TAPE PROTECT> Item Superimposed display STILL TIMER PROTECT DRUM STDBY STOP PROTECT DV STILL The underline on the setting item denotes the initial setting. <Note> In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be set for automatic tape protection mode in 20 seconds or under.

  • Page 18: Time Code

    USER menu <TIME CODE> Item Superimposed display VITC POS-1 VITC POS-2 VITC BLANK REGEN REGEN MODE EXT TC BINARY PHASE CORR TCG CF FLAG The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 This sets the position where the VITC signal is to be inserted. (The same line as for VITC POS-2 in 501 cannot be 0006 selected.)
  • Page 19 Setup menus USER menu <TIME CODE> Item Superimposed display DF MODE RUN MODE TC OUT VITC OUT The underline on the setting item denotes the initial setting. SBC (Sub Code Data) area This area exists independently from the video and audio data areas on the helical track, and it contains the time code which complies with the SMPTE/EBU standard.
  • Page 20 USER menu <VIDEO> Item Superimposed display IN LV INT SG INPUT C KILL VSYNC V-MUTE CC (F1) BLANK CC (F2) BLANK FREEZE The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 This selects the component input signal level. 0: M level.
  • Page 21 Setup menus USER menu <VIDEO> (continued) Item Superimposed display WIDE SELECT VIN SETUP Pb/Pr OUT The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 AUTO This selects the operation to be conducted in response to the WIDE information.
  • Page 22 USER menu <AUDIO> Item Superimposed display CH1 IN CH2 IN CH1 OUT CH2 OUT REC CH1 REC CH2 REC CUE OUTPUT PB FADE The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 This selects the audio input (CH1) reference level switching. 0001 0002 –20dB...
  • Page 23 Setup menus USER menu <AUDIO> (continued) Item Superimposed display EMBEDDED LINE CH INT SG DV PB ATT REC PT MUTE REF LEVEL The underline on the setting item denotes the initial setting. Setting Superimposed display 0000 This selects whether to superimpose the audio data onto the serial output.
  • Page 24 USER menu <MENU> Item Superimposed display LOAD SAVE P.ON LOAD MENU LOCK The underline on the setting item denotes the initial setting. <Notes> • No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can be set only for USER1.

Table of Contents