Table of Contents
Advertisement
INSTALLATION
Set-Top
Box Connection
to VCR
Follow this diagram
when connecting
the STB to a standard
VCR.
NOTE;
VIDEO
AND AUDIO
CABLES
NOT INCLUDED
Incoming signal
from antenna or
TV
STB
1
I
VCR SETUP
Procedure
Move the output mode switch to the NTSC position.
Connect video cable from the video output jack on the STB to the video input jack on the
VCR.
Connect audio cables from the left and right audio output jacks on the STB to the left and
right audio input jacks on the VCR.
•
Connect video cable from video output jack on the VCR to video input jack on TV.
Connect audio cables from the left and right audio output jacks on the VCR to the left and
right audio input jacks on the TV.
Q
Advertisement
Table of Contents
