On-Line Set (Onln); Set Password (Pass) - Panasonic KX-TVS50 Installation Manual

Type OFLN, then Press RETURN. If no VPS ports are in use, the VPS will immediately
suspend the call progressing service.
$ OFLN
** OFF LINE MODE **
If any VPS port is in use, the VPS will display the following warning:
*** Now line is used!! *** <WAIT>
The VPS will be in the Off-Line Mode when the following message is displayed.
** OFF LINE MODE **

7.2.2 On-line Set (ONLN)

The ONLN command is used to place the VPS in the Call Progressing Mode.
Type ONLN, then Press RETURN.
$ ONLN
** ON LINE MODE **

7.2.3 Set Password (PASS)

The PASS command is used to create, change and clear system passwords. Valid passwords are
created using up to 8 characters; any alphanumeric character, [ (space)], [.] and [_] can be used.
1.
Type PASS, then Press RETURN.
$ PASS
1: Administrator Password 2: System Reset/Clear Password :=
2.
To create a password or change an existing password, go to Step 3.
To clear a password, go to Step 4.
3.
To create a password or change an existing password:
a) Type [1] or [2]
Maximum 8 characters
NEW PASSWORD : =
Note
When you press [2] to change the System Reset/Clear password you should
type the current (OLD) password before entering a new one.
b) Type the password.
SYSTEM MAINTENANCE AND TROUBLESHOOTING
7.2 UTILITY COMMANDS
135