Panasonic KX-TDA0484 Programming Manual page 59

Firmware Status shows the current firmware status of page 0 and page 1, and Startup
Page shows the current active page on startup. For details about these parameters, refer to
"3.3.2 Handling of Firmware Page".
3.
Do the following to update the desired page with the uploaded firmware data:
a.
Click the option for the page whose current firmware status is not "Main Operation Mode"
for Select Page.
b.
Click OK.
You will see a confirmation screen.
c.
Click OK.
4.
Do one of the following:
• Click REBOOT to start up the VoIP Gateway Card with the updated page and confirm that
the upload operation has been carried out successfully.
You will see a reboot confirmation screen. Refer to "3.4.1 Reboot" and finish the reboot.
Note
After the reboot, the card starts up with the updated page temporarily so that you can
confirm the result of the upload operation. If you reboot again, the card does not start
up with the updated page, but starts up with the page whose current firmware status is
"Main Operation Mode".
• Click CANCEL to return to the main menu without starting up the card with the updated
page.
3.3 Data Management
Programming Guide 59