1.2 General information
These operator instructions include the information required for
appropriate use of the described products. They address
technically qualified personnel with sufficient qualification or
knowledge in the range of instrumentation and control
engineering, in the following referred to as automation
engineering.
The knowledge and technically correct application of the safety
information and warnings described in this document are a basic
requirement for safe installation and commissioning, as well as
safe operation and maintenance of the described product. Only
qualified personnel according to the following description
possesses the expert know-how required to apply the general
safety information and warnings of this document correctly in any
specific and individual case.
The operator instructions are included in the scope of supply.
However, not every detail of the different models of the described
product and not any particular installation, operation, and
maintenance condition can be considered.
If more information is required or if specific problems arise which
are not discussed in this document, additional information can be
requested from your local Siemens subsidiary or from any one of
the addresses given on the back cover of this guide.
E50417-K109U-C322-A
SIMEAS
5
1