Mounting; Ordering Data - ABB ARR600 Product Manual

Wireless i/o gateway
Hide thumbs Also See for ARR600:
Table of Contents

Advertisement

Wireless I/O Gateway
ARR600
Product version: A

7. Mounting

The devices have been equipped with mounting arrangements
that are specially designed for DIN rail mounting. A set of DIN
rail mounting clips is recommended to be used when mounting.
The device should be mounted preferably inside a robust,
locked and weatherproof control cabinet.
As the device uses a cellular radio for data transmission, the
surrounding environment can negatively affect the efficacy of
these radio signals. Therefore, if a device with the antenna is
mounted on the antenna connector, the unit should not be
placed in a location where the radio signal might be shadowed,
and therefore deteriorated by nearby obstacles or enclosures.
The large metallic surfaces, racks or walls with metallic
structures (cabling, concrete iron, and so on) may degrade the
antenna performance to a very high extent. In this case, it is
Table 14. Ordering data
Description
ARR600A3221NA
Radio IF
GPRS
Data speed max
85.2 kbps
LAN/WAN
1
RS-232/RS-485
2
SIM card
1
Supply voltage
12...48 VDC
Modbus RTU to
x
Modbus TCP
conversion
IEC-101 to
x
IEC-104
conversion
DNP3 serial over
x
TPC/IP
IO-1 (8DI+2DO)
x
IO-2 (6DI+4DO
-
+2AI)
Supported
IEC-104, Modbus
protocols for I/O
TCP, SNMP
controlling
16
ARR600A3222NA
ARR600A3251NA
GPRS
3G
85.2 kbps
21 Mbps
1
1
2
2
1
1
12...48 VDC
12...48 VDC
x
x
x
x
x
x
-
x
x
-
IEC-104, Modbus
IEC-104, Modbus
TCP, SNMP
TCP, SNMP
highly recommended to use the optional external antenna with
appropriate cable. This allows for better positioning of the
devices, antennas and thus optimal performance.
Another restriction to the positioning of the device during
installation is that it should be mounted in such a way that the
required environmental conditions that are set in the Technical
data section of this product guide are met.

8. Ordering data

The product label contains basic information about the unit
such as product name, serial number and Ethernet MAC
address.
The product label is found at the bottom of the device.
ARR600A3252NA
3G
21 Mbps
1
2
1
12...48 VDC
x
x
x
-
x
IEC-104, Modbus
TCP, SNMP
1MRS758464 A
ARR600A3261NA
ARR600A3262NA
LTE
LTE
100 Mbps
100 Mbps
1
1
2
2
1
1
12...48 VDC
12...48 VDC
x
x
x
x
x
x
x
-
-
x
IEC-104, Modbus
IEC-104, Modbus
TCP, SNMP
TCP, SNMP
ABB

Advertisement

Table of Contents
loading

Table of Contents