Table of Contents
Advertisement
Section 700 - Operation
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Mode Schedule
Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
39.)
You can set the System to automatically enter None, Day 1, Day2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Enter the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first mode.
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key.
8. Enter the desired mode for Pattern 1 - first (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8107-
System Mode displays
0-
Mode Schedule displays
000
:HHMM
PTN 1-1 Start T displays
001
:
PTN 1-1 Mode displays
91
Advertisement
Table of Contents
