Panasonic DBS 576HD User Manual page 41

5. To set additional Message Key ID codes, press the
HOLD
arrow or to move to the desired extension.
6. Repeat steps 4-5 until all Message Key ID codes are set.
AUTO PROG
7. Press to return to "81-User Maintenance" (step 1 above).
OR...
AUTO ON/OFF
Press
Name Assignments
To set extension names using either a large-display or
small-display phone:
1. Enter "User Maintenance" by pressing
03 HOLD HOLD HOLD
2. Enter: and press
Extension Number
3. Dial the
Extension Name
4. Enter:
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired speed dial
name.
Note: Press the FLASH key to clear the entire entry.
HOLD
7. Press to store the entry.
8. To set additional extension names, press the
HOLD
to move to the desired SSD.
9. Repeat steps 4-8 until all extension names are entered.
AUTO PROG
10. Press to return to "81 - User Maintenance" (step 1 above)
OR...
AUTO ON/OFF
Press
576-36-750
2. Setting Up Your Phone
VOLUME
to exit User Maintenance.
ON/OFF PROG * * CONF
.
HOLD
and press .
:
VOLUME
up or down arrow or
to exit User Maintenance.
DBS 576 (USA), issued October 2000
up or down
41