Video Output Board Wj-Pb65M16 - Panasonic WJ-SX650 Operating Instructions Manual

■ Video Output Board WJ-PB65M16

Video output board is composed of a main board (installed into the front side) and rear boards (x 3)(installed into the rear
side).
● Front View
q Output Mode Selection Switches (MODE)
Refer to p. 52 Switch Settings for Video Output Board
(Main Board) for details.
w Reset Switch (RESET)
This button is pressed to reset the whole system.
(Equivalent to power off and on)
● Rear View
OUT X-3 board
OUT X-2 board
OUT X-1 board
OUT X-3 board
r Extension Ports 1 (EXTENSION 1: IN, OUT)
These ports connect to an optional card cage.
t Termination Selector (TERM: ON, OFF)
Turns on or off the line termination of r.
y Data ports 1, 2 (DATA 1, 2)
Each port connects to system controllers.
u Data ports 3, 4 (DATA 3, 4)
Each port connects to system controllers or recorders.
i Rear Termination MODE Switches 1 to 4 (MODE 1 to
4)
Turns on or off the line termination of y and u.
12
DATA 4 DATA 3 DATA 2 DATA 1
Video Output Board 2 HDR4/TMNL8 HDR3/TMNL7 TMNL6 TMNL5
HDR2/TMNL4 HDR1/TMNL3 TMNL2 TMNL1/PS DATA
Video Output Board 1
16 15 14 13 12
ALARM OUT 2
TEST
RESET
e w
e Test port (TEST)
This port is used only for factory tests. Do not connect
anything.
y
4 3
TERM.ON TERM.OFF
ON
MODE MODE
MODE DATA MODE
11 10 9 8 7
MONITOR OUT
VS OUT
ALARM OUT 1
(THRU)
!0 !2
OUT X-2 board
o Monitor Output Connectors (MONITOR OUT 1 to 16)
These connectors connect to monitors.
OUT X-1 board
!0 Alarm Output Ports 1,2 (ALARM OUT 1, 2)
• Supplies alarm output signals.
• Accepts alarm recover input signals.
• Supplies and accepts the time adjust input and output
signals.
!1 VS Input Connector (VS IN)
Accepts a VS input signal from an external device.
!2 VS Output Loop-thru Connector (VS OUT (THRU))
Loops through VS input signals supplied to !1 .
MODE
q
u r
2 1
OFF
MODE DATA MODE OUT EXTENSION 1 IN TERM.
6 5 4 3 2
VS IN
Video Output Board 1 Only
VS OUT SERIAL
!4
t
ON
OUT X-3 i
o
1
OUT X-2
!1
!3
OUT X-1