Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Philips Selecon. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited.
PLCYC1 MKII LED Luminaire QuickStart Guide TABLE OF CONTENTS Philips Selecon Offices ....................... Inside Front Cover TABLE OF CONTENTS IMPORTANT INFORMATION Warnings and Notices ............................. 2 Additional Resources for DMX512 ........................ 2 Philips Selecon Limited Three-Year Warranty....................2 PREFACE About this Guide..............................3 Product Descriptions ..............................
Philips Selecon offers a three-year limited warranty of its luminaires against defects in materials or workmanship from the date of delivery. A copy of Philips Selecon three-year limited warranty containing specific terms and conditions can be obtained from the Philips Selecon web site at www.seleconlight.com or by contacting your local Philips Selecon office.
PLCYC1 MKII LED Luminaire QuickStart Guide PREFACE 1. About this Guide This Quickstart Guide is intended for a knowledgeable user to unpack, install, and use the PLCYC1 MKII LED Luminaire in a short time period. For the complete manual in PDF format, please visit our web site at: www.seleconlight.com and click the user manual download link on the product page.
PLCYC1 MKII LED Luminaire QuickStart Guide INSTALLATION AND SET UP 1. Power Requirements WARNING! The PLCYC1 MKII LED Luminaire should be connected to a constant circuit or a relay device. It should never be connected to a dimmer or circuit controlled by a dimmer. The PLCYC1 MKII LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging).
PLCYC1 MKII LED Luminaire QuickStart Guide 2. Connecting Power Note: Refer to Figure 1 for AC Input and Output connections. AC Output AC Input Connection Connection (to next luminaire, optional) Figure 1: AC Input and Output Connections If the unit is supplied with an AC input cable, Table 1 describes how to connect power to your PLCYC1 MKII LED Luminaire.
PLCYC1 MKII LED Luminaire QuickStart Guide 3. Connecting to the DMX512 Network Note: Refer to Figure 2 for DMX512 Input and Output/Thru connections. Basic DMX512 installation consists of connecting multiple PLCYC1 MKII LED Luminaires together (up to 30 luminaires) in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector on the first PLCYC1 MKII LED Luminaire.
PLCYC1 MKII LED Luminaire QuickStart Guide 4. Mounting PLCYC1 MKII LED Luminaires offer a plastic monocoque yoke design for mounting by theatrical clamps or hooks (sold separately). WARNING! Before attempting any installation or service, disconnect all power at power source. Turning off the output of the luminaire does not disconnect power.
PLCYC1 MKII LED Luminaire QuickStart Guide 5. Tilt Adjustments To adjust luminaire tilt position: Step 1. As shown in Figure 4, at tilt locking handle, loosen handle by twisting to the left. Yoke Assembly Luminaire Head Assembly Tilt Locking Handle 9.5 in.
PLCYC1 MKII LED Luminaire QuickStart Guide OPERATION AND PROGRAMMING 1. LCD Menu Operation The PLCYC1 MKII LED Luminaire’s LCD Display and Menu System provides local control for accessing all the fixture’s status information, menu options, and settings. Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired. Upon power up, the LCD will display the main screen showing the product type/name.
Note, Philips Selecon does not have records of PIN codes established by users or owners. Note: Contact Philips Selecon technical support if a unit is locked and the PIN code is lost for instructions on how to reset luminaire.
PLCYC1 MKII LED Luminaire QuickStart Guide 4. Presets Presets are Color Mixes that are stored in the Fixture, they can be recalled to reproduce a specific output from the fixture. Presets are made up of a Color Mix; Red, Green, Blue, and White. They also have Intensity associated with them.
Page 14
PLCYC1 MKII LED Luminaire QuickStart Guide Table 2: Settings Menu User-Settable Parameters Parameter Values Default Description General Normal Mode (120W), Sets the luminaire’s output mode - Normal Power, Fan Studio Mode (80W), or Normal Mode Mode (120W), Studio Mode (80W) or Quiet Mode (60W) Quiet Mode (60W).
1. Troubleshooting Guide The chart below provides possible causes and remedies for various error messages and/or symptoms. WARNING! Any service and maintenance (including troubleshooting), other than described herein should be performed by an Authorized Philips Selecon Dealer or Service Center. Description Symptom Possible Cause/Remedy Unit is set to Preset Off...