Pepu External Page Interface Unit; Pepu Programming - Toshiba Strata DK40 Installation & Maintenance Manual

DK40 Universal Slot PCBs

PEPU Programming

Program 03: Specify Code 41 for the slot that will support a PEPU.
Program 10-2: Activates External Page with All Call Page (with access code &6< only, not
with $OO &DOO 3DJH button).
Program 77-1: Assigns relay control options.
Program 78: Sets Night Ringing over External Page.
Table 3-2 PEPU Controls, Indicators, and Connectors
Control/Indicator/Connector
M/B make/break jumper plug P10
M/B make/break jumper plug P11
SPI/SPO internal/external amplifier
switch SW4
Volume control VR1
3-10
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Type of Component
3-terminal jumper plug
2-position slide switch
Trim potentiometer
SPO
P10
SW4
M
M B
SPI
P11
1390
Figure 3-4 PEPU Printed Circuit Board
External page/door lock control relay
make or break jumper plug.
Night/hold relay make or break jumper
plug.
Not used in DK40.
Not used in DK40.
Backplane Connector
B
VR1
50-Pin Female Amphenol Connector
Strata DK40 I&M Manual Spring 1999

PEPU External Page Interface Unit

Description