Table of Contents
Advertisement
Quick Links
Installation plan
Washing machine
PW 6055 AV/LP
PW 6065 AV/LP
en - AU, NZ
To avoid the risk of accidents or damage to the machine, it is essential to read
operating and installation instructions before installation and commissioning
This will prevent both personal injury and damage to the machine.
10 291 510 / 01
Advertisement
Table of Contents
Related Manuals for Miele PW 6065 AV/LP
Summary of Contents for Miele PW 6065 AV/LP
-
Page 1: Washing Machine
Installation plan Washing machine PW 6055 AV/LP PW 6065 AV/LP en - AU, NZ To avoid the risk of accidents or damage to the machine, it is essential to read operating and installation instructions before installation and commissioning This will prevent both personal injury and damage to the machine. - Page 2 Legend: Connection optional or required, Connection required depending on model Drain valve Cold water connection Drain connection Drain pump Machine anchors Equipotential bonding Grey water connection Peak-load connection Dispenser connection Box plinth Electrical connection Open plinth Machine feet, adjustable WTV Washer-dryer stacking kit Payment system Hot water connection Payment system connection...
- Page 3 en – AU, NZ PW 6055/6065 Machine dimensions PW 6055 10 291 510 / 01...
- Page 4 en – AU, NZ PW 6055/6065 Installation PW 6055 10 291 510 / 01...
- Page 5 en – AU, NZ PW 6055/6065 Washer-dryer stack PW 6055 10 291 510 / 01...
- Page 6 en – AU, NZ PW 6055/6065 Machine dimensions PW 6065 10 291 510 / 01...
- Page 7 en – AU, NZ PW 6055/6065 Installation PW 6065 10 291 510 / 01...
- Page 8 en – AU, NZ PW 6055/6065 Washer-dryer stack PW 6065 10 291 510 / 01...
-
Page 9: Installation
en – AU, NZ PW 6055/6065 Installation 10 291 510 / 01... - Page 10 en – AU, NZ PW 6055/6065 Installation 10 291 510 / 01...
-
Page 11: Technical Data
en – AU, NZ PW 6055/6065 Technical data PW 6055 AV PW 6055 LP PW 6065 AV PW 6065 LP Drum volume Load capacity Door opening diameter Max. spin speed 1400 1400 1400 1400 g factor Residual moisture (standard load per DIN 60456) E l e c t r i c a l c o n n e c t i o n ( E L ) Standard voltage 2N AC 400 V... - Page 12 en – AU, NZ PW 6055/6065 Technical data PW 6055 AV PW 6055 LP PW 6065 AV PW 6065 LP Standard voltage 13A (GB only) 1N AC 220-240 V Frequency Total rated load 2.1 - 2.4 Fuse rating (B trip rating according to EN 60898) 1 x 13 Supply lead min.
- Page 13 en – AU, NZ PW 6055/6065 Technical data PW 6055 AV PW 6055 LP PW 6065 AV PW 6065 LP Standard voltage (CDN only) 2 AC 208 V Frequency Total rated load Fuse rating 2 x 20 Supply lead min. cross-section mm²...
- Page 14 8 x 40 8 x 40 Anchoring of Miele plinths Accessory: Miele plinth (fasteners included) Required anchor points Wood screws according to DIN 571 8 x 65 8 x 65 8 x 65 8 x 65...
-
Page 15: Options & Accessories
Connection of peak-load/energy management (BSS) Connection for peak-load and energy management functionalities Equipotential bonding kit The conversion kit is available from Miele Communication module XKM (XKM RS 232-10) Retrofitting kit XKM module with RS 232, including building-in kit = standard, = optional, + = only on request, - not available... -
Page 16: Installation And Planning Notes
85°C. This requires the use of a separate heat-resistant inlet hose. The machine can be hard-wired or connected using a switched This additional hose must be obtained from Miele. In addition, the connection in accordance with IEC 60309-1 or AS/NZS 3000. It is... - Page 17 If required, the hose can be extended to a length of 5 m. The necessary parts can be ordered from Miele. For a delivery head of more than 1 m (up to a max. of 1.6 m) a replacement drain pump will need to be fitted. Please contact Miele for advice. Equipotential bonding...