Synchronizing The Time - Canon EOS-1D X Mark II G Instruction Manual

Synchronizing the Time

Connect the cameras to each other directly with a LAN cable. When
there are multiple slave cameras, connect them to a hub with LAN
cables, and connect the hub to the master camera with a LAN cable.
Steps 1 to 5 are the same on the master and slave cameras.
Synchronize the camera time between the same camera
models.
If the camera models of the master camera and slave cameras are different,
synchronizing the time with slave cameras is not possible.
68
Select [Communication settings].
1
Under the [53] tab, select

[Communication settings], then
press <0>.
Select [Network settings].
2
Set [Communication func] to

[Enable], then select [Network
settings].
Select [Sync time between
3
cameras].
If connected to another device, [Set

[Connection settings] to
[Disconnect]] will appear. Select
[OK] to terminate the connection.
Select [OK].
4