Displaying The Picture - Hitachi CP-WU8460 User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to the
projector.
2. Press the INPUT button on the projector.
Each time you press the button, the projector
switches its input port in turn.
You can also use the remote control to select
an input signal. Press any of the buttons from
COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI
1 / 2, COMPONENT, S-VIDEO or VIDEO to
select the input signal from each port.
3. Use the VOL + / - buttons to adjust the volume.
The projector is not equipped with an internal
speaker. The audio is output from the external
audio system connected to the AUDIO OUT port.
4. Press the ASPECT button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
5. Use the ZOOM + / - buttons on the remote
control or ZOOM
on the projector to adjust the screen size.
6. Use the FOCUS + / - buttons on the projector or
the remote control to focus the picture.
ZOOM button
FOCUS - / + buttons
CAUTION
on, use the lens shade or AV MUTE function (see User's Manual - Operating
Guide). Taking any other action may cause the damage on the projector.
NOTE
The ASPECT button does not work when no proper signal is inputted.
operation is made. This is not a malfunction.
Operating Guide.
VOL + / -
buttons
INPUT button
ASPECT
button
ZOOM + / -
buttons
FOCUS + / -
buttons
User's Manual -
11