Option Menu - Yamaha RX-V750 Owner's Manual

3 OPTION MENU

Use to adjust the optional system
3 OPTION MENU
. A)DISPLAY SET
B)MEMORY GUARD
C)PARAM. INI
D)ZONE SET
/ : Up/Down
- / + : Select
Display set
A)DISPLAY SET
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
OSD shift OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Gray back GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there's no video signal input.
Nothing is displayed if OFF is selected.
Choices: AUTO, OFF
Note
If "GRAY BACK" is set to OFF, no information will be displayed
on the screen when video signals are not being input.
Video conversion V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to both S-Video and component signals.
This allows you to output converted video signals from the
S VIDEO jack or the component video jack when no S-
Video or component signals are input. This feature also
converts S-Video signals to component signals when no
component signals are input.
Choices: ON, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-Video and
component signals, and to convert S-Video signals to
component signals.
Notes
• Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-Video) between each component.
• When converting S-Video signals from a VCR to component
video signals, the picture quality may suffer depending on your
VCR.
settings.
Component OSD CMPNT OSD
Use this feature to turn on/off OSD output to the
COMPONENT VIDEO MONITOR OUT jacks when
using the set menu, test tone or parameter functions.
Choices: ON, OFF
• Select ON to output the OSD signals from
COMPONENT VIDEO MONITOR OUT jacks.
• Select OFF if you do not want to output the OSD
signals from COMPONENT VIDEO MONITOR OUT
jacks.
Note
Set menu functions even when OFF is selected.
Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: ON, OFF
B)MEMORY GUARD
[OFF
/ : Exit
-/+ : Select
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
When MEMORY GUARD is set to ON, you cannot use
the test tone or select any other setup menu items.
Parameter initialization
Use this feature to initialize the parameters for each sound
program within a sound
field
you initialize a sound program group, all of the
field
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
C)PARAM. INI
1
*5
9 *10
SETUP MENU
ON
C)PARAM. INI
program group. When
field
field
2 3 *4
6 7 8
11
61