Parts And Their Functions; Front Panel; Rear Panel - Panasonic AJ-PCD20EJ Operating Instructions Manual

Parts and their Functions

Front Panel

(1)
(1)Power Indicator
This indicator lights up in green when the P2
drive is running.
(2)Status Indicator
This indicator lights up in green during access
to a P2 card.
<Note>
Do not remove the P2 card during access of
the card, otherwise files may be corrupted, or
the P2 card may fail.
(3)Card Slots
The P2 drive's card slots are designed for P2
cards.
The P2 drive does not operate with cards
other than P2 cards.
(4)EJECT Button
To remove a P2 card, press this button so that
the button pops out, then press it in again.
<Note>
For Macintosh only: To remove a P2 card,
drag the icon of the P2 card to "Trash," and
then press the EJECT button after confirming
that the P2 card icon disappears.
(2) (3) (4)

Rear Panel

IEEE 1394b
USB 2.0
(1) (2) (6)
The picture shows the rear panel with its cover
removed.
(1)USB 2.0 connector (Type B)
This connects a USB cable. Use a USB cable
(shielded) compliant with USB 2.0.
<Note>
The P2 drive supports USB 2.0 only. It does
not support personal computers compliant
with USB 1.1. For Macintosh, USB 2.0
operations are not guaranteed.
(2)IEEE1394b connector
This connects an IEEE1394b cable.
<Notes>
When cables are connected to both the
USB 2.0 connector and IEEE1394b
connector, only the interface that was
connected first after turning on the power is
available.
For Windows 8, IEEE1394b operations are
not guaranteed.
(3)DC IN 16V Socket
For external use of the P2 drive, connect an
AC adapter to this socket.
For the AJ-PCD20EJ only: For external use of
the P2 drive, connect the power switch box to
this socket.
(4)DC IN 12V Socket
To use the P2 drive mounted in a personal
computer, connect one of the power supply
connectors inside the personal computer to
this socket. (See page 12)
<Note>
Do NOT supply power to both the DC IN 12V
socket and DC IN 16V socket at the same
time.
DC IN 16V
DC IN 12V
(5) (3) (4)
7