Table of Contents
Advertisement
Pull out the condensate container
6.
fully.
Turn the condensate container 180°
7.
onto its underside and remove the
stopper that is fitted. Turn the
condensate container back and
insert the stopper into the recess on
the top side of the condensate
container.
Pull the filter out of the notch and
8.
place it into the recess on the
condensate container.
Installation and connection
Slide in the condensate container
9.
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin
If you want to change the
Note:
condensation drain back to the
condensate container, carry out these
steps in reverse order.
en
33
Advertisement
Table of Contents
