Miele PT 5136 Operating And Installation Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PT 5136 OS
  6. Operating and installation manual

Miele PT 5136 Operating And Installation Manual

Vented dryer
Hide thumbs Also See for PT 5136:
Table of Contents

Advertisement

Quick Links

Operating and Installation manual
Vented Dryer
PT 5136
en - US, CA
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 09 758 410

Advertisement

Table of Contents
loading

Related Manuals for Miele PT 5136

Summary of Contents for Miele PT 5136

  • Page 1 Operating and Installation manual Vented Dryer PT 5136 en - US, CA To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 09 758 410...

  • Page 2: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Guide to the dryer ..........6 Control panel .

  • Page 3: Important Safety Instructions

    Faulty components must only be clothes with a fabric care label stating it replaced with genuine Miele spare is safe for tumble drying. parts. Only genuine Miele spare parts Other uses may be dangerous. can guarantee the safe operation of this Technical Safety machine.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Danger of suffocation or toxication Adequate ventilation is Do not install a clothes dryer with essential, especially when another flexible plastic venting materials. If appliance which also uses the room air flexible metal (foil type) duct is (e.g.

  • Page 5: Save These Instructions

    Using accessories remover, wax or chemicals from buffing, etc. Only use genuine Miele accessories and replacement parts. If other parts – items which have been splashed with are used, guarantee, performance and hair spray, nail polish remover, etc.

  • Page 6: Guide To The Dryer

    Guide to the dryer Control panel a Display* e Optical Interface PC See the following pages for more Allows a service technician to check information. and update the drying programs. b Start button f "Low temperature" button Starts the selected wash program. g Program selector c +/ –...

  • Page 7: Display Function

    Guide to the dryer Display function Remaining time The display shows several functions on: When a program is selected, the approximate duration is displayed. This – the program selection is the "remaining time". – the program duration and the time of The program duration can vary due to day at program start and end.

  • Page 8: Before Using For The First Time

    When the dryer is used for the very first time, the Welcome screen shows. The basic menus with the current time of day shows as long as no program is "Miele Professional Welcome" will not selected. show again once the language and The display shows "Settings" J.

  • Page 9: Use

    Fabric care labels – Wool and wool blends tend to felt and shrink. Dry wool and wool Before drying, check fabric care labels blends in the "Woollen handcare" for special drying instructions. program. q = Drying with normal temperature – The fine fabric of down filled items r = Drying with low temperature tend to shrink.

  • Page 10: Sort The Laundry

    1. Sort the laundry 2. Load the laundry ^ Use the "Door" button to open the Loosen the washed laundry and sort by desired dryness, fiber / fabric, size and drum door. similar residual moisture after spinning ^ Load the laundry loosely into the for even drying results.

  • Page 11: Select A Program

    3. Select a program Cottons, Minimum iron Normal 1:16 h Duration: Different drying levels can be selected. Towelling, Woollen handcare, Smoothing The drying level and duration are fixed. Cool / Warm air 1:00 Warm air ^ Select the desired program with the program selector.
  • Page 12 4. Select Delay Start Special programs (if desired) When selecting "Special programs" the display shows the list. See "Delay Start". Denim 5. Insert coins (if operated by Shirts coin mechanism) Outerwear If a coin mechanism operates the ^ Mark the desired program with the machine, please regard the displayed +/- button.

  • Page 13: Start A Program

    6. Start a program 7. At the end of a program During the program selection the "Start" "Anti-crease" (if selected) and "End" indicator flashes meaning that the mark the end of a program in the program can be started. display. During the anti-crease phase the drum will turn in intervals if the ^ Press the "Start"...

  • Page 14: Coin Mechanism

    Coin mechanism Adding/removing laundry during a drying program For coin mechanism operated ^ Press the "Door" button. machines: Money or tokens will be lost when the door is opened after ^ Open the door. program start or when canceling a program.

  • Page 15: Program Guide

    Program guide Cottons Load size: 14.3 lbs (6.5 kg) Normal+, Normal Items Single and multilayered cotton and linen laundry e.g. Terry towels, - beach towels, bath robes, T-Shirts, underwear, cottons bed linens, baby clothing, etc. Select Low temperature for items with the fabric care symbol r Note Hand iron r, Machine iron Items...
  • Page 16 Program guide Cool air Load size: 14.3 lbs (6.5 kg) Items To air dry items Warm air Load size: 14.3 lbs (6.5 kg) Items – Final drying of multi-layer fabrics, with unique drying characteristics. e.g. jackets, pillows and large textiles. –...
  • Page 17 Program guide Towelling Load size: 14.3 lbs (6.5 kg) Normal+ Items Terry laundry, e.g. towels, beach towels, bath robes. Denim Load size: 7.7 lbs (3.5 kg) Normal, Hand iron r Items Denim fabric items, pants, jackets, skirts, shirts, etc. Shirts Load size: 5.5 lbs (2.5 kg) Normal, Hand iron r Items...

  • Page 18: Delay Start

    Delay Start Starting the Delay Start The program end time can be selected. The program start can be delayed for ^ Press the "Start" button. up to 24 hours. Normal Selecting the Delay Start ^ Press the m button. Begin in: 0:45 h 10:00 The time elapses in minutes until the...

  • Page 19: Cleaning And Care

    Cleaning and Care Cleaning the lint filter ^ Clean the door gasket (2) with a damp cloth. The lint is collected by the lint filter in the door. The lint filter must be cleaned The lint filter can be rinsed with hot after every program.

  • Page 20: Cleaning The Grid Filter

    Cleaning and Care Cleaning the grid filter Cleaning the exterior and the control panel To reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or tripping the circuit breaker. Do not use abrasive cleaners, glass cleaners or all-purpose cleaners.

  • Page 21: Frequently Asked Questions

    – See "Clean out immediately. airways". Technical fault A numerical fault In some cases "Clean out To delete the message: message shows, airways" is displayed. – Confirm with "OK". e.g. "F47". If the problem persists call Miele Technical Service Department.
  • Page 22 Frequently asked questions What if Possible cause Solution Clean out The dryer does not work at its – Usually cleaning the lint airways optimum or not efficiently. filter fixes the problem. If the problem persists, Possible cause: clogging by check all possibilities as lint or detergent residues described under "The program runs too long or...

  • Page 23: Other Faults

    Frequently asked questions Other faults What if ... Possible fault Solution The program In some cases "Clean out airways" is displayed. See "Clean runs too long or out airways". Open and close the dryer door. stops. The air supply is Open a window or door to insufficient.
  • Page 24 Frequently asked questions What if ... Possible fault Solution What if there is The dryer is connected to a – The dryer must only be condensed water in collective exhaust duct installed with a non-return the drum? where the non-return flap flap to the collective does not work correctly.
  • Page 25 The program selector The program selector light indicator flashes light goes out when the lights when a program is slowly. "Settings" menu is selected. selected. If the problem cannot be Call the Miele Technical fixed, call the Technical Service Department. Service.

  • Page 26: Changing The Light Bulb

    ^ Slide a screwdriver with a wide head underneath the side edge of the bulb cover and twist (see illustration). ^ Flip down the bulb cover. ^ Replace the light bulb with a temperature proof bulb available from Miele.

  • Page 27: After Sales Service

    After sales service The PC indicator allows a service In the event of a fault which you cannot fix yourself, please contact the Miele technician to check and update the Technical Service Department at the drying programs. address on the back of this booklet.

  • Page 29: Installation Instructions

    Installation Instructions To prevent accidents and machine damage read these instructions before installation or use.

  • Page 30: Installation

    Installation Front view a Exhaust connection d Door e Four height adjustable feet The exhaust hose can be installed either at the rear, left or right of the f Cement base dryer. g Fixing bracket (for installing on a b Power cord concrete plinth) c Control panel...
  • Page 31 Installation Side view Rear view a Lid over hang with transport grips (arrow) b Stand (Optional accessory)
  • Page 32 Installation Top view Washer/ Dryer Stack The Miele dryer can be installed as part of a washer-dryer stack in combination with a Miele washer. An appropriate "stacking kit" available from Miele is required. Installation of the stacking kit must be completed by a Miele Service...
  • Page 33 Installation on a cement base Coin mechanism The dryer can be equipped with a coin mechanism (optional accessory). Miele’s Technical Service will install the coin mechanism and program the dryer electronic. Empty the coin mechanism regularly to avoid the coins getting jammed.
  • Page 34 Installation Installation Do not install a lockable or slide door in the pivoting area of the dryer door. Transporting the dryer to the installation site The rear overhang of the lid has transport grips. ^ Use the front dryer feet and the rear overhang to transport the dryer from the packaging base to the installation ^ The machine can be leveled by...

  • Page 35: Electrical Connection

    The conversion must be performed by a Miele Service The dryer comes with a power cord Technician. without a plug. The machine is supplied as standard...

  • Page 36: Installation Of Exhaust Venting

    Installation of exhaust venting General notes The dryer must only run if the moist exhaust air from the drying process is conducted outside by an installed exhaust duct vent. Disconnect the dryer from the mains during installation of the exhaust duct. The exhaust connection (e.g.

  • Page 37: How To Calculate The Effective Duct Length

    Installation of exhaust venting How to calculate the effective Tips about the ductwork duct length – Check with your local building code to determine the maximum allowable The overall duct length will determine duct length. the duct diameter. ^ Measure the actual duct length –...
  • Page 38 Installation of exhaust venting Additional duct lengths (4" rigid pipe only) Type of bend Radius Additional duct length Flexible metal duct – 3’ 3" (1 m) straight 5’ 11" – 45° angle 10" 4’ 11" – 90° angle 10" 8’ 2" Smooth metal duct –...
  • Page 39 Installation of exhaust venting Example: Calculating the effective duct length and required internal duct diameter Rigid pipe Duct length Duct length 12’ 5" 3.8 m Wall duct with louvered wall vent 2’ 7" 0.8 m 90° bend 1’ 7" 0.5 m 20"...

  • Page 40: Determining The Position Of The Exhaust Connection

    Installation of exhaust venting Determining the position of the exhaust connection The exhaust connection can be left at the rear of the dryer (factory standard) or moved to the left or right side of the dryer. Changing the position of the exhaust connection ^ Remove the cap turning it counterclockwise.

  • Page 41: Exhaust Connection With A Flexible Exhaust Hose Or Rigid Pipe

    Installation of exhaust venting Exhaust connection with a Window connection flexible exhaust hose or rigid pipe Using the connector supplied, an exhaust hose (4" [100 mm] diameter) can be installed. Necessary materials: – the supplied connector – a wall or window duct (optional accessory) –...
  • Page 42 Installation of exhaust venting Chimney connection 1 Pipe with connection nozzle (= single parts of the Miele wall pipe) 2 Connector for the flexible exhaust hose 3 Chimney, humidity insulated The appliance must not be connected to a chimney or vent flue which is in use.

  • Page 43: Direct Wall Connection

    However, for the wall pipe to be installed a hole must be cut through the outer wall. Regard the Install manual for the Miele wall pipe and the dimension illustrations below. Necessary materials: – wall pipe (optional accessory) –...
  • Page 44 Installation of exhaust venting Dryer side view ^ Connect the flexible space ring, 2, to the wall pipe connector, 1. 1 Wall pipe ^ Push the dryer to the wall. 2 Flexible foam gasket (space ring)
  • Page 45 Installation of exhaust venting Collective exhaust duct A non-return flap* (optional accessory, see right picture) per dryer must be installed directly into the collective exhaust duct. Otherwise the dryers can be damaged and the electrical safety compromised. When installing multiple dryers, increase the duct diameter.

  • Page 46: Technical Data

    Technical Data Height 33 7/16" (850 mm) (adjustable + / - 1/4" (7 mm)) Width 23 7/16" (595 mm) Depth 27 9/16" (700 mm) Depth with the door open 46 3/4" (1,188 mm) Weight 117 lbs (53 kg) Drum 28.6 gal (130 l) Maximal load 14.3 lbs (6.5 kg) Dry laundry weight Power cord...

  • Page 47: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of an appliance materials Old appliances may contain materials that can be recycled. Please contact The cardboard box and packing your local recycling authority about the materials protect the appliance during possibility of recycling these materials.
  • Page 49 Depending on default settings – some settings are visible and can be changed by all users (Menu "Settings J") – all setting are locked in the "Supervisor level" by a code (Menu "Settings - Supervisor level"). Contact Miele Technical Service.

  • Page 50: Settings J

    Settings J Opening the menu "Settings" Language J A The basic menus with the current The displayed language can be set time of day shows as long as no in the submenu "Language" J. program is selected. The flag behind the word "Language" is 10:00 a guide to find the settings menu in Please select...
  • Page 51 Settings J Contrast / Brightness Buzzer Display contrast and brightness can When the buzzer is selected a tone be changed in 10 levels. sounds at the end of a program. The bar shows the selected level. The end-of-program buzzer is turned Standby off.

  • Page 52: Menu Settings - Supervisor Level

    Menu Settings - Supervisor level Supervisor level The menu "Settings/Supervisor level" Changing the code is locked with a code to prevent unauthorized access (except The access code for the supervisor "Language J"). It needs to be level can be changed. activated by Technical Service.
  • Page 53 Menu Settings - Supervisor level Cleaning the airways Cool air free The lint filters must be cleaned after If the dryer is used with a coin every drying cycle. Additionally the mechanism, the program "Cool air" indicator "Clean out airways" lights can be provided for free.
  • Page 56 Technical Service & Support customercare@miele.ca Nationwide 800-999-1360 Phone: 888-586-8056 Fax: TechnicalService@mieleusa.com Germany Manufacturer Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh All rights reserved / 1814 M.-Nr. 09 758 410 / 00 For the most current manual see the Miele web site.

Table of Contents