Table of Contents
Advertisement
Option Card Setting Submenu
AW-PB301
**Opation Card Set**
Zebra Indicator
Zebra 1 Level
Zebra 2 Level
Safety Zone
EVF Output
Component
Return
q Zebra Indicator [Zebra Indicator: OFF/ON]
ON: Zebra indicator is shown in the viewfinder.
OFF: Zebra indicator is not shown in the viewfinder.
Note: If [CVBS] is selected at Item [EVF Output:
Y/CVBS] r, the zebra indicator will not be
shown.
w Zebra 1 Level Set [Zebra 1 Level: 70% to 109%]
Zebra 2 Level Set [Zebra 2 Level: 71% to 110%]
Zebra level 1 or 2 can be only when Zebra Indicator
q is at ON.
AW-PB305
**Opation Card Set**
ON
Zebra Indicator
70%
Zebra 1 Level
85%
Zebra 2 Level
I
Safety Zone
Y
EVF Output
R/G/B
Return
e Safety Zone Select [Safety Zone: 1 to 5/OFF]
-10-
ON
70%
85%
I
Y
The zebra indicator can be shown in two steps
using two zebra patterns.
2 Level shows a finer zebra pattern than 1 level.
2 Level must be set at least 1% higher than 2 level.
A type of safety zone to be shown in the viewfinder
can be selected.
No safety zone is shown if OFF is selected.
Advertisement
Table of Contents
