Table of Contents
Advertisement
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER'S CODE
EvalPAN4570
8.3. SELECTING THE HARDWARE PLATFORM
The EmberZNet stack uses a Ember
module), which is defined in a BOARD_HEADER file. This file is named dev0455.h and
located in the folder
....\Ember\EmberZNet2.5.0\hal\micro\xap2b\em250\board\
IMPORTANT:
different another BOARD_HEADER file is required.
After installation of EmberZNet2.5.0 the required change of the BOARD_HEADER file
can be done as follows:
Rename the dev0455.h extracted with EmberZNet for example in dev0455_ember.h
Copy the PAN4570.h file from the cd to the location where dev0455.h was located
Rename the PAN4570.h file to dev0455.h
PAN4570.h enables D11, D14, SW2 and SW6 connected to PAN4570 for the use of
the "simple-lighting" sample application.
The two switches and two LEDs are used as follows:
board
LED
LIGHT
D11
LIGHT
D14
LIGHT
SW2
LIGHT
SW6
SWITCH
SW2
SWITCH
SW6
For custom applications 5 buttons and 4 LEDs are available on the testboard, the
carrierboard/testboard schematics in part 10 show their connections to the GPIOs.
Changes regarding the GPIOs should always be done only in the BOARD_HEADER file.
European Technology Center
Panasonic Electronic Devices (EUROPE) GmbH
EvalBoard PAN4570
PANASONIC'S CODE
Because the use and settings of GPIOs on the PAN4570 testboard is
GPIO
Ember
3
HEARTBEAT_LED
12
LIGHT
15
BUTTON 1
8
BUTTON 0
15
BUTTON 1
8
BUTTON 0
TM
platform (Ember
TM
function
name
heartbeat
LIGHT
LIGHT ON and networking
LIGHT OFF and networking
LIGHT ON
LIGHT OFF
APPROVED
genehmigt
No.
DS-Eval4570-2400
PAGE
Seite
10 of 20
DATE
06.11.2006
Datum
TM
breakout board and RCM
(Table 4)
CHECKED
DESIGNED
geprüft
REV.
C
Erstellt
Advertisement
Table of Contents
