Panasonic CN-GP50N Operating Instructions Manual page 25

Delete All: Deletes all destinations from the L
then empty. A dialog window prompts you to confirm deletion.
Delete Destination: Deletes the highlighted destination from the list (L
D
ESTINATIONS
deletion.
Edit: Opens a window to edit the selected destination.
Factory Settings: Opens a window in which you can reset all settings to the
original factory settings.
GPS: Opens the GPS S
GPS reception. You can also save the data of your current location.
For more detailed information, please refer to chapter "GPS Status,
Storing the Current Location" on page 33.
Load Route: Opens a dialog window in which you can load a stored route.
New Route: Deletes the starting point and all route points from the R
P
LANNING
If necessary, save the previously planned route!
Rename: Opens a window in which you can change the name for the selected
route.
Save Destination: Saves the specified address or destination in the F
list.
For detailed information, please refer to chapter "Saving Destinations" ,
page 17.
Save Route: Opens a window in which you can save the planned route under a
specific name.
For detailed information, please refer to chapter "Saving Routes", page
22.
Settings: Opens the S
system.
For detailed information, please refer to chapter "Changing the
Navigation Settings", page 35.
Show on Map: Shows the specified address on the map.
Simulation: Simulates a navigation based along the displayed route. This
simulation can be performed without GPS reception. Simulation is,
however, restricted to routes of max 100 km (60 mi).
Touch screen Calibration: Opens a window in which you can recalibrate the
touch screen (realign) should it react imprecisely to touch.
Options
or F
AVOURITES
window. Here you can see details regarding
TATUS
window, so that you can plan a new route.
window. Here you can configure the navigation
ETTINGS
D
AST ESTINATIONS
). A dialog window prompts you to confirm
list. The list is
AST
OUTE
AVOURITES
- 25 -